MCPC2425B

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Solid State Relays

A Solid State Relay (SSR) is an electronic device used in the switching or controlling of industrial processes. It is a solid state, electronic replacement for electromechanical relays, providing advantages such as increased reliability and reduction in physical size. When compared to electro-mechanical relays, SSRs are much faster and much more reliable. This type of relay is composed of a small bridge structure of semiconductor materials (thyristors or transistors) and other components that help to control the switching of electrical circuits.

MCPC2425B is a commonly used, general-purpose SSR offered by Mersen. It is rated to handle DC voltage up to 250 V with a maximum current of 10 A. The MCPC2425B has an off-state voltage drop of ≤ 2.5 V, an on-state voltage drop of ≤ 0.5 V, and an insulation electrical strength of 4 kV ac/min. This makes it well-suited to applications such as motor control, lighting, heating and cooling, solenoid and solenoid valve control, and other small power circuit applications.

The working principle of an SSR is fairly simple. The SSR consists of an opto-isolator and a solid state switch. The opto-isolator is the input section that senses a small change in current or voltage according to the set point. This change in current is used to control the solid state switch, which is the output section of the SSR. When the set point is reached, the output of the opto-isolator will activate the solid state switch, and this in turn will close the circuit and allow an electrical current to flow. This current may be used to power a motor, a heater, or any other electrical device. The opto-isolator will remain in the on state as long as the set point is met. When the current or voltage drops below the set point, the solid state switch will automatically turn off, preventing any further current from flowing.

The MCPC2425B is a great choice for stationary industrial applications, as it features a reliable switching of electrical current without the need for mechanical parts. It can be controlled by a variety of input signals, including DC and AC voltage and current. The device is very compact, and can be installed in places where mechanical relays cannot. With its low on-state voltage drop and high insulation electrical strength, it is well-suited to a variety of industrial switching and controlling applications.

The specific data is subject to PDF, and the above content is for reference