MCST4850BM

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Solid state relays (SSRs) are electronic switching devices that use semiconductors rather than electromechanical mechanisms to control a circuit. They are commonly used to replace mechanical relays and contactors. SSRs offer several advantages over mechanical relay, including higher current capacities, faster switching responses, and better isolation between the input and output circuits. Among the various SSRs, the MCST4850BM is the most widely used.

The MCST4850BM is a single-pole, single-throw, normally open relay with a low pin count and a high current rating. It has a maximum contact current rating of 48.5A and a maximum power rating of 50W. The contact is controlled by a built-in optically-coupled switching element. The output contacts can be connected to a separate circuit via insulated terminals, making it ideal for controlling high-voltage and high-current devices. The MCST4850BM also features built-in protection-diode and snubber components for improved safety.

The MCST4850BM can be used in various applications, such as lighting and heating controls, motor control, power supply control, and window blinds control. It is typically used to control high-power loads from a low-voltage or low-current control signal. The MCST4850BM can also be used for high-current output switching in security and automotive systems. In the security applications, the SSR’s fast response time and high current rating make it ideal for alarm systems.

The working principle of the MCST4850BM SSR is based on optically-coupled switching. The input signal, which can be either an AC or DC voltage, is connected to an LED diode. The LED is connected to an optical sensor which detects the light from the LED and switches the output contact. The output contact is connected to a load that is supplied with power. The LED is energized when the control voltage is applied and the light from LED is relayed to the optical sensor. The optical sensor then switches the output contact to complete the circuit and power the load. When the control voltage is removed, the LED turns off and the output contact opens.

In conclusion, the MCST4850BM is a single-pole, single-throw, normally open relay with a high current rating and excellent switching characteristics. It can be used in a variety of applications, including lighting and heating controls, motor control, power supply control, window blinds control, security systems, and automotive systems. Its working principle is based on optically-coupled switching, which allows for fast switching responses and precise control. The built-in protection-diode and snubber components provide additional protection and safety.

The specific data is subject to PDF, and the above content is for reference