MCT210SD

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MCT210SD optically coupled isolator consists of a gallium arsenide infrared emitting diode and an NPN silicon photo transistor. It is designed for use in power line transmission and communication systems. The device provides electrical isolation between two different circuits and provides a minimum of 3,000 Volts of isolation. It is an optically coupled isolator that has a wide range of applications and is suitable for a variety of applications, such as motor control, protective relay, and communication systems.

The MCT210SD is a two-lead device, with the two leads being the anode and collector. The anode is the emitter of the infrared light and the collector is the phototransistor, which is a current-operated device. The device also has a transparent epoxy case, which allows the light from the anode to pass through and activate the transistor.

The MCT210SD can operate in two modes. The first mode is the on/off mode, which is activated when the operating voltage is above a threshold voltage, usually 5 Volts. When the voltage is above this value, the transistor is in the on state and the current is conducted through the device and will turn on the load. When the voltage drops below the operating voltage, the transistor is in the off state and the load is disconnected from the circuit.

The second mode is the pulse mode, which is activated when the operating voltage is between the minimum (typically 2.5 Volts) and the maximum threshold voltage (typically 5 Volts). When the voltage is in between these two values, the transistor is in the off state for a short duration and then quickly switches to the on state. This pulsing behavior (the transistor turning on and off quickly) enables it to be used for communications and power switching in sensitive circuits.

The MCT210SD has a maximum operating current of 50 milliamps, which means it can handle a wide range of loads without any damage. In addition, it can handle high-frequency switching and has a transient protection capability, making it suitable for many applications. It also has a wide operating temperature range, from –25°C to +125°C.

The MCT210SD optically coupled isolator is designed to provide electrical isolation between two circuits. Its optical isolation is high, up to 3,000 Volts, and its two operating modes make it suitable for a wide range of applications, from motor control to communication systems. It has a wide operating range, with a maximum operating current of 50 milliamps, and a wide operating temperature range. The device is also designed for high-frequency switching and transient protection.

The specific data is subject to PDF, and the above content is for reference