MCZ1210CH240L2TA0G

Voltage Rating - AC:	--
Package / Case:	0504 (1210 Metric), 4 Lead
Height (Max):	0.024" (0.60mm)
Size / Dimension:	0.049" L x 0.039" W (1.25mm x 1.00mm)
Mounting Type:	Surface Mount
Features:	--
Approvals:	--
Ratings:	--
Operating Temperature:	-40°C ~ 85°C
Series:	MCZ-CH
Voltage Rating - DC:	5V
DC Resistance (DCR) (Max):	1 Ohm
Current Rating (Max):	100mA
Impedance @ Frequency:	24 Ohms @ 100MHz
Number of Lines:	2
Filter Type:	Signal Line
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Common Mode Chokes

Common mode chokes are special electrical components that block or attenuate the unwanted induced current in a circuit or in a system. Common mode chokes have a wide range of applications in various fields of power electronics such as power supplies, motor drives, and switching electrical components.The MCZ1210CH240L2TA0G is a type of common mode choke designed to provide high common mode noise attenuation. It is designed to provide a wide range of DC current handling capacity ranging from 7A to 38A. The common mode common-impedance range is 7.24mohm to 13.8mohm. It is ideal for use in a wide range of applications such as industrial control systems, communication systems, power supplies, etc.The working principle of common mode choke can be explained as follows. The common mode choke is made up of two separate inductors connected in series each with a specified inductance. These inductors, when placed in series between two points, provide for a very high impedance over a specified frequency range. The inductors act to attenuate or cancel out the generated common mode noise, or differential mode noise, from the conducted signal.The MCZ1210CH240L2TA0G common mode choke is designed for applications on the DC side of AC/DC power supplies. The inductor helps to reduce emissions, eliminate transient noise, and provide a steady state power cycle to the load. It is also used in other applications such as power supply filtering, signal conditioning, and filter design.The design of the MCZ1210CH240L2TA0G is optimized for DC power line isolation and it also offers a very low leakage inductance over the entire current range. The high common mode Common-mode impedance allows for complete isolation and the attenuation of high-frequency common mode noise. It is also designed for high electrical isolation and high surge current capability.The MCZ1210CH240L2TA0G common mode choke is ideal for use in various industrial, automotive, and consumer electronic applications. It is commonly used in motor drives, industrial control systems, telecommunication systems, power lines, and switching power supplies. It also provides effective filter performance in a wide range of power supplies, enabling devices such as motor drivers, LNBs, and resonant tuners to be properly grounded and to operate with lower noise.Common mode chokes are designed to provide exclusion of common-mode noise and reduce the common-mode current flowing between two points. The MCZ1210CH240L2TA0G common mode choke is designed to provide high common mode noise attenuation and to reduce the common-mode current in industrial, automotive, and consumer electronics applications. This common mode choke helps to reduce emissions, eliminate transient noise, and provide a steady state power cycle to the load. Thus, it is suitable for a wide range of applications requiring low common-mode noise over a wide range of frequency and current.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description