MD00S1NCGF

Actuator Type:	Flatted (3.17mm Dia)
Operating Force:	2.880 ~ 5.041gfm
Panel Cutout Dimensions:	Circular - 6.60mm Dia
Depth Behind Panel:	10.42mm
Features:	IP67 - Dust Tight, Waterproof
Termination Style:	PC Pin
Mounting Type:	Panel Mount, Through Hole
Contact Finish:	Gold
Contact Material:	Copper Alloy
Angle of Throw:	30°
Actuator Length:	10.16mm
Series:	M
Voltage Rating - DC:	28V
Voltage Rating - AC:	125V
Current Rating:	250mA (AC/DC)
Contact Timing:	Non-Shorting (BBM)
Circuit per Deck:	DP6T
Number of Poles per Deck:	2
Number of Decks:	1
Index Stops:	Continuous
Number of Positions:	6
Part Status:	Active

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Rotary switches, also known as rotary changeover switches, are mechanical devices that allow a user to make a one-time connection between two or more external circuits. They are commonly found in control panels and control cabinets, used to limit the connection of an external circuit or device to one or more other external circuits or devices, or to provide a particular voltage output or current. MD00S1NCGF is a type of rotary switch. Before looking into the application field and working principle of MD00S1NCGF, this article will discuss the general working principle of rotary switches.

General Working Principle of Rotary Switches

Rotary switches operate by rotating a segmented shaft in order to make electrical connections. The shaft is supported by a cylindrical insulator, which has a removable cap which is used to adjust the switch to the desired position. The shaft is then interrupted and divided into two running surfaces by a slot, which is segmented into several contacts connecting two separate circuit paths. As the shaft is rotated, a rotor arm rotates a cam, which actuates the contacts, completing a circuit connection between the two running surfaces of the slot. This is effectively what happens when a rotary switch is activated.

The Application Field and Working Principle of MD00S1NCGF

MD00S1NCGF is a rotary switch with three poles and two positions. It has a stainless steel shaft, with a removable cap made of polypropylene plastic, and is available with either a solder lug or a PC terminal connection. The voltage rating is 12–400 volts, and the current rating can be up to 16A. The working principle of MD00S1NCGF is the same as regular rotary switches. As mentioned before, as the shaft is rotated, a rotor arm rotates a cam, which actuates the contacts, completing a circuit connection between the two running surfaces of the slot. MD00S1NCGF features three sets of terminals, one for the common position, and two for the selection positions. When the switch is at a certain position, the two selection positions are connected to the common position, allowing the flow of current from the respective poles to the common pole.

Conclusion

To sum up, MD00S1NCGF is a type of rotary switch with three poles and two positions, and operates using the same working principle of regular rotary switches. It has a removable cap made of polypropylene plastic, and is available with either a solder lug or a PC terminal connection. The voltage rating is 12–400 volts, and the current rating can be up to 16A.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description