MD200S16M3-BP

Series:	--
Packaging:	Bulk
Part Status:	Active
Diode Type:	Three Phase
Technology:	Standard
Voltage - Peak Reverse (Max):	1.6kV
Current - Average Rectified (Io):	200A
Voltage - Forward (Vf) (Max) @ If:	1.6V @ 300A
Current - Reverse Leakage @ Vr:	500µA @ 1600V
Operating Temperature:	-40°C ~ 150°C (TJ)
Mounting Type:	Chassis Mount
Package / Case:	Module
Supplier Device Package:	M3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

The MD200S16M3-BP is a bridge rectifier diode module that is manufactured in small and thin packages for easy installation and low-profile applications. This type of diode operates by using two diodes connected in a bridge configuration to allow AC currents to flow from one side of the bridge to the other. The diode module is also designed to withstand a wide temperature range and can be used in industrial, medical, automotive and commercial applications.

Application Fields

The MD200S16M3-BP Bridge Rectifier Diode is commonly used in many applications where AC voltage needs to be converted to DC voltage. The most common applications are the following:

• Electronic chargers, such as battery chargers, AC/DC power supplies and switch mode power supplies
• DC to DC convertors
• Inverters
• Circuit protection and reverse polarity circuit protection.
• High voltage applications.

Working Principle

The working principle of a bridge rectifier diode is based on two main functions: the ability to transfer current in a single direction and to block current flowing in the opposite direction. The MD200S16M3-BP Bridge Rectifier is designed with two diodes connected in a bridge configuration, which allows both AC and DC current to flow. When AC current is present on both sides of the bridge, the diodes conduct current to create a DC voltage. When a positive voltage is applied to one side of the bridge, both diodes are forward biased and allow current to flow through the bridge in one direction. Meanwhile, when a negative voltage is applied to the other side of the bridge, the two diodes become reverse biased and current is blocked from flowing in the opposite direction.

Conclusion

The MD200S16M3-BP Bridge Rectifier Diode is a small and thin package diode module designed for easy installation and low-profile applications. The diode is designed to withstand a wide temperature range and is ideal for use in industrial, medical, automotive, and commercial applications. The bridge rectifier diode operates by using two diodes connected in a bridge configuration to allow AC currents to flow from one side of the bridge to the other, while blocking current flowing in the opposite direction.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description