MDP140133K0GE04

Number of Pins:	14
Height - Seated (Max):	0.155" (3.94mm)
Size / Dimension:	0.750" L x 0.250" W (19.05mm x 6.35mm)
Supplier Device Package:	14-DIP
Package / Case:	14-DIP (0.300", 7.62mm)
Mounting Type:	Through Hole
Applications:	--
Operating Temperature:	-55°C ~ 125°C
Temperature Coefficient:	±100ppm/°C
Power Per Element:	125mW
Series:	MDP
Resistor-Ratio-Drift:	--
Resistor Matching Ratio:	--
Number of Resistors:	13
Tolerance:	±2%
Resistance (Ohms):	33k
Circuit Type:	Bussed
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Resistor Networks, ArraysResistor networks, arrays are electronic components consisting of one or more parallel arrays of resistors connected in a network, or linear array. These resistor networks provide an effective method of managing electrical signals and currents. Common applications are power supply (ranging from low to high voltage) and amplifier control.The MDP140133K0GE04 is a resistive networks device used in various electronic applications. It is a 4-sided DIP package device with a combined total resistance of 33K ohms (33,000 ohms). The device has an operating temperature range of -55°C to +125°C.The MDP140133K0GE04 device consists of four resistors (R1, R2, R3, and R4) placed in parallel inside a single integrated package. These resistive networks devices can be configured by using combinations of the resistors to achieve different levels of resistance. For example, if R1 and R2 were connected in series, it would create a 33K ohm resistance. If R1, R2, and R3 were connected in series, the resistance would become 22K ohms, and so on.The MDP140133K0GE04 resistance networks are used in many applications, such as power supplies, voltage dividers, and sensors. These resistor networks are also used in the design of digital logic circuits and in analog circuitry for signal filtering, biasing, and level setting.In a power supply application, the MDP140133K0GE04 is used as a voltage divider, with one resistor connected to ground and the rest connected to the positive voltage source. The output voltage is determined by the ratio of the resistors. For example, a 33K ohm resistor connected to a 10V power supply would provide an output voltage of 0.3V (10V * 1/33 = 0.3V).In amplifier control, the resistor networks are used to adjust the gain of the input and output signals. By varying the resistor values, the gain of the amplifier can be adjusted to match the audio signal requirements.The MDP140133K0GE04\'s working principle is the same as any other resistors in parallel - the total resistance is the sum of all the individual resistor values, and the power dissipation is the sum of all the individual resistor powers. The total resistance of the network is determined by the individual resistor values through the following equation:Rtotal = 1/{1/R1 + 1/R2 + 1/R3 + 1/R4}In general, the power dissipation is equal to the voltage divided by the total resistance, and the current is equal to the voltage divided by the total resistance.In conclusion, the MDP140133K0GE04 is an integrated resistor network device designed to provide an effective way to manage electrical signals and currents. By using combinations of the resistors, the device can be configured to provide various levels of resistance. The device is most commonly used in power supplies and amplifier controls, as a voltage divider, and for signal filtering, biasing, and level setting in digital and analog circuits.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description