MDP160122K0GE04

Number of Pins:	16
Height - Seated (Max):	0.155" (3.94mm)
Size / Dimension:	0.850" L x 0.250" W (21.59mm x 6.35mm)
Supplier Device Package:	16-DIP
Package / Case:	16-DIP (0.300", 7.62mm)
Mounting Type:	Through Hole
Applications:	--
Operating Temperature:	-55°C ~ 125°C
Temperature Coefficient:	±100ppm/°C
Power Per Element:	125mW
Series:	MDP
Resistor-Ratio-Drift:	--
Resistor Matching Ratio:	--
Number of Resistors:	15
Tolerance:	±2%
Resistance (Ohms):	22k
Circuit Type:	Bussed
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Resistor Networks, Arrays A resistor network, or array, is a complex of interconnecting resistors and other electronic components that is available in many different forms. Resistor networks are used to provide resistive and capacitive effects to circuit boards.One common use of resistor networks is for creating electronic circuits that need to be heavily resistant to current or voltage surges. A resistor array can also be used to create a bias voltage in an electronic circuit. This bias voltage can be used to control the behavior of the transistors in a circuit board.The most commonly used package in resistor networks is the MDP160122K0GE04. This versatile package is ideal for a variety of applications. It is a standard surface mount package with gold plated terminals. It is able to accommodate up to 10 discrete resistors in a single surface mount package. The MDP160122K0GE04 is a unique package because it contains two different types of resistors – two fixed and two adjustable. The fixed resistors are a pair of 100kΩ ohms each, while the adjustable resistors have a 10kΩ maximum resistance range. This makes them ideal for adjustable current limiting or voltage dropping applications.The working principle of the MDP160122K0GE04 resistor network is relatively simple. It uses a combination of heat and current to create resistive and capacitive effects. This is done by causing a reaction between the heatsink and the resistors on the network.When current passes through the resistors, a small amount of heat is generated which then reacts with the heat sink. This creates a resistive force on the terminals, which in turn decreases the current passing through the network. This effectively creates the desired resistive and capacitive effects.The MDP160122K0GE04 is a versatile surface mount package suitable for a wide range of applications. It is highly resistant to voltage and current surges, allowing for safe operation in a circuit. It is capable of accommodating up to ten discrete resistors in a single package and can be used to create adjustable current limiting or voltage dropping effects. Its heat management properties allow for the resistive and capacitive effects required for numerous applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description