MDP1605191AGE04

Number of Pins:	16
Height - Seated (Max):	0.155" (3.94mm)
Size / Dimension:	0.850" L x 0.250" W (21.59mm x 6.35mm)
Supplier Device Package:	16-DIP
Package / Case:	16-DIP (0.300", 7.62mm)
Mounting Type:	Through Hole
Applications:	--
Operating Temperature:	-55°C ~ 125°C
Temperature Coefficient:	±100ppm/°C
Power Per Element:	125mW
Series:	MDP
Resistor-Ratio-Drift:	--
Resistor Matching Ratio:	--
Number of Resistors:	28
Tolerance:	±2%
Resistance (Ohms):	330, 470
Circuit Type:	Dual Terminator
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Resistor Networks, Arrays

The MDP1605191AGE04, also known as a Resistor Network or Array, is a common electrical component used in a variety of circuits. It is often referred to as an array because it consists of a grid of resistors, all of which are interconnected. The purpose of an array is to divide the total voltage from a power source into a number of separate outputs, each outputting a smaller voltage than the input.

Application Field:

The MDP1605191AGE04 is typically used in applications where direct current (DC) power is needed in a consistent manner. Some of the most common uses of resistor networks include power supplies, invertors, power switches, and amplifiers. They can be used in computer systems, including power supply boards, battery management systems, and audio systems.

Work Principle:

Resistor networks are based on a basic principle known as voltage division. Voltage division is the process where the total voltage from a power source is divided into a number of smaller voltages. This is achieved through the use of resistors, which can be arranged in various ways to divide the voltage. In a resistor network, each resistor in the array contributes to the total voltage, according to the Impedance, which is the ratio of voltage to current (also known as Ohm\'s Law). The MDP1605191AGE04 is a 9-polarized Resistor Network, meaning that 9 resistors are connected in a specific configuration to allow for a range of divisions.For example, if the source voltage is 12V, this gives us 9 different resistors, each contributing to the total voltage, and each having an Impedance of 12V/1A. The total voltage is then divided into 9 separate outputs, each outputting a voltage of 1.33V. This type of resistor network can be used to regulate the voltage from a power source while also providing consistent power to a variety of circuits.In addition to voltage division, resistor networks can also be used for current division. By changing the connection of the resistors, the current can be divided among the outputs in a specific manner. This can be useful for powering multiple circuits with the same power source, while also protecting each circuit from damage caused by too much or too little current.

Conclusion:

The MDP1605191AGE04 is a Resistor Network or Array, which can be used for both voltage and current division. It is a common electrical component used in a variety of applications, including power supplies, inverters, power switches, and amplifiers. It is based on the principle of voltage division, where resistors are arranged in a certain configuration to divide the total voltage from a power source. In addition, it can also be used for current division, allowing multiple circuits to share the same power source.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description