ME701602

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The ME701602 is a bridge rectifier module with a full wave design, allowing both low AC input voltages and high DC output currents. It is a 3 phase alternative current (AC) bridge with high frequency input voltage up to 800 volts. The device features low-cost, low-inductance structures capable of up to 300A continuous output current, produced by die-cast aluminium through-hole insulated modules.

The ME701602 bridge rectifier works using a full-wave rectifying circuit. This circuit is made up of four diodes which are arranged in a ‘bridge’ configuration. The AC voltage is applied to the terminals on either side of the bridge, and the output of the rectifier is taken from the opposite side of the bridge. Thus, the bridge rectifier not only provides a full-wave rectifying action, but also a full-wave voltage inversion.

The structure of the ME701602 bridge rectifier consists of a number of layers. At the bottom layer is the aluminium block, which is used as the conductor for the current. It also serves as the heat sink for dissipation of excess heat generated by the rectifying circuit. On the top layer is the insulation layer, which protects the inner components of the device from thermal and wearing damage. Above the insulation is the rectifier layer, which contains the diodes and other components. The top layer is the fourth layer, which contains the two terminals which are used to connect the device to the AC power source.

A few key features of the ME701602 bridge rectifier are its high efficiency and thermal management capabilities. The efficiency of this device is typically in the range of 93-98%, depending on the input power. Its thermal management is also quite advanced, allowing for better voltage distribution and corresponding increases in rectifier life. The module also has a high power dissipation level, capable of handling up to 300A of continuous current. Finally, the ME701602 features a low-inductance design, making the device suitable for high-frequency applications.

The ME701602 bridge rectifier is a versatile and reliable device, designed to provide high efficiency and thermal management. It is ideal for rectifying low-voltage AC power to higher DC power levels. With its high efficiency, high power dissipation level, and low-inductance design, it is well-suited for a variety of applications, ranging from high-frequency and lighting applications to automotive, power supplies, and PC peripherals.

The specific data is subject to PDF, and the above content is for reference