MEA2010LC220T002 Filters

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

EMI/RFI filters (LC, RC networks) are used to reduce undesirable electromagnetic interference (EMI) or radio frequency interference (RFI) that can be introduced into electrical systems. The MEA2010LC220T002 is one such filter. This filter is a two-pole, 220VAC low-pass filter with a current rating of 10A. It is used to reduce interference caused by high voltage power lines, communications equipment, cable TV, wireless radio, and other sources. It is suitable for a wide range of applications from domestic and commercial use to industrial applications.

The filter works by attenuating radio frequencies and higher primary frequencies, allowing only the desired lower frequencies to pass through. The filter is made up of two components: an inductor (L) and a capacitor (C). The inductor acts as an impedance to the flow of high-frequency current, blocking any high-frequency noise that is present. The capacitor acts as a short circuit to any low-frequency noise, allowing only the desired low-frequency current to pass through. The two components, together, form an LC network, which acts as a filter for higher frequencies.

The MEA2010LC220T002 is designed to reduce noise in the frequency range of 10-250MHz. The filter has a high common-mode rejection ratio (CMRR) of 35dB, meaning that it is able to reduce interference from even the most powerful interference sources. It also has a high insertion loss (IL) of 28dB, meaning that it is capable of reducing the signal strength of a wide range of high frequencies. The filter is designed to operate in temperatures from -25° to +85°C, making it suitable for a wide range of environments.

The MEA2010LC220T002 is designed with a two-part housing to ensure that the filter is protected from dust and moisture. The housing is made of a flame-resistant polycarbonate material, which is highly resistant to most chemicals. The filter is designed to be easy to install and is UL 94V-0 certified, meaning that it complies with the latest safety standards. The filter also has a low leakage current of less than 0.5mA, meaning that it has minimal effect on the capacity of the circuit in which it is installed.

The MEA2010LC220T002 is a reliable and cost-effective EMI/RFI filter. It is designed to reduce interference from high-frequency sources while preserving the low-frequency signals, making it an ideal solution for a wide range of applications. The filter is easy to install and is UL certified for safety, making it suitable for both domestic and industrial applications.

The specific data is subject to PDF, and the above content is for reference