MEM1608P75R0T001

Current:	100mA
Height:	0.028" (0.70mm)
Size / Dimension:	0.063" L x 0.032" W (1.60mm x 0.80mm)
Package / Case:	0603 (1608 Metric), 3 PC Pad
Mounting Type:	Surface Mount
Voltage - Rated:	10V
Applications:	Data Lines for Mobile Devices
Operating Temperature:	-40°C ~ 85°C
ESD Protection:	No
Values:	--
Series:	MEM
Resistance - Channel (Ohms):	--
Attenuation Value:	20dB @ 300MHz ~ 2GHz
Center / Cutoff Frequency:	75MHz (Cutoff)
Number of Channels:	1
Technology:	LC (Pi)
Filter Order:	3rd
Type:	Low Pass
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to EMI/RFI Filters (LC, RC Networks)Electro-magnetic interference (EMI) and radio-frequency interference (RFI) can cause interference in electronic systems. EMI/RFI Filters are devices used to reduce or eliminate interference in electronic systems. They do this by absorbing or reflecting unwanted frequencies, or by creating a physical barrier to the signal. EMI/RFI filters commonly use an LC (inductor-capacitor) or RC (resistor-capacitor) circuit configuration.MEM1608P75R0T001MEM1608P75R0T001 is an EMI/RFI filter designed to reduce interference on frequencies from 80 MHz to below 500 MHz. It is a three-stage low-pass filter, using two LC and one RC filter stage. It is intended to reduce EMI/RFI generated by digital circuits, such as those found in computers, audio-video equipment, and other devices. The filter consists of two series-connected inductors and one shunt-connected capacitor, and is designed for a narrow frequency range.Application Field and Working Principle of MEM1608P75R0T001The MEM1608P75R0T001 filter is typically used in digital signal processing systems, communications systems, and other applications susceptible to EMI/RFI interference. The filter is designed to reduce noise on high-frequency signals within a narrow band of frequencies, and it is well-suited for digital applications.The MEM1608P75R0T001 filter works by passing signals through two series-connected inductors and one shunt-connected capacitor. When a signal of the correct frequency is applied, it is allowed to pass through the filter. At higher frequencies, the inductors form a high-impedance, blocking the signal from passing through. The capacitor, meanwhile, forms a low-impedance path for signals below a certain frequency. This allows the filter to reduce interference from unwanted higher-frequency signals, while allowing the desired signal to pass.ConclusionThe MEM1608P75R0T001 is an EMI/RFI filter designed for use in digital signal processing systems and communications systems. It is a three-stage filter, consisting of two series-connected inductors and one shunt-connected capacitor, and has a narrow frequency range. The filter works by blocking higher-frequency signals, while allowing lower-frequency signals to pass. It is an effective tool for reducing unwanted interference on digital signals.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description