MEM2012V211RT001

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Electromagnetic interference (EMI) and radio frequency interference (RFI) are two types of interference that can limit the performance or functionality of electronic devices. EMI and RFI filters (LC and RC networks) are used to reduce the amount of interference that is present in the system. The MEM2012V211RT00 is an example of an EMI filter that is used to reduce the amount of interference that is present in the system.

The MEM2012V211RT00 is a two-line ceramic EMI filter that is designed to provide EMI/RFI filtering for two lines of power. The filter is designed to reduce the amount of EMI and RFI present in the system by providing a low impedance path to these frequencies, while at the same time blocking out the higher impedance signals. This allows for communications to be conducted in an environment where EMI and RFI would otherwise reduce the performance of the system.

The filter is designed to have an insertion loss of less than 0.1dB, which is a very low figure. Insertion loss refers to the amount of power that is lost when the signal passes through the filter. This low insertion loss ensures that the signal quality is not compromised when the filter is used.

The MEM 2012V211RT00 is designed to have a very high attenuation at 18 GHz, which is the high frequency range for EMI and RFI. This high attenuation ensures that the filter is able to block out the unwanted high frequency signals and allow the lower frequency signals to pass through. This high level of attenuation is necessary for proper system performance.

In addition to the high attenuation, the filter has a low-pass rate in the kHz and MHz range, which is necessary for properly filtering out frequency signals. This low-pass feature combined with the high attenuation provides excellent signal isolation for the system.

The MEM 2012V211RT00 also has a low-passrate at DC, which is necessary for minimizing the impact of power harmonics on the system. The low-passrate works to make sure that only the desired frequencies are passed through the filter.

The MEM 2012V211RT00 is designed with a low-profile SMD package, which makes it easy to install in tight spaces. The filter also has high thermal stability, which ensures that it can be used in environments with high temperatures. This filter is also designed to be resistant to moisture and chemicals, which makes it well-suited for use in harsh environmental conditions.

The MEM 2012V211RT00 is a reliable EMI and RFI filter that is designed to provide excellent EMI and RFI protection. This filter provides a low insertion loss and high attenuation, which ensures that the signal quality is not compromised when the filter is used. The filter also has a low-passrate, which helps to minimize the impact of power harmonics and other unwanted signals on the system. Additionally, the SMD package makes the filter easy to install in tight spaces and the high thermal stability makes it suitable for use in harsh environments.

The specific data is subject to PDF, and the above content is for reference