MEM2012W211RT001

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

EMI/RFI Filters (LC, RC Networks), are used to protect circuits from Electromagnetic Interference (EMI) and Radio-Frequency Interference (RFI) which can cause unwanted signals or system malfunction.The MEM2012W211RT001 is an EMI/RFI Filter that demonstrates the effectiveness of these types of filters in reducing the amount of interference created.

The MEM2012W211RT001 is a low-pass filter type, meaning it is designed to attenuate higher frequencies and allow lower frequencies to pass through easily. This allows very low frequencies, such as the power frequency of 50/60 Hz, to pass through the filter with no attenuation, while higher frequencies such as those from EMI/RFI interferers will be greatly attenuated. The MEM2012W211RT001 is a two-terminal filter, meaning it is a single component filter, as opposed to the multi-component filters which are more common, such as the 3-terminal types.

The MEM2012W211RT001 is designed for use in digital and analog circuits with an operating range between 0Hz and 200MHz. The frequency attenuation is measured between 10 ~ 30 dB depending on the frequency and the load, allowing the user to customize the filter to their application as needed. It is also designed to handle high-power applications of up to 8A.

The MEM2012W211RT001 is designed with a Low Pass LC Network, which is comprised of a series-connected capacitor and inductor. The MEM2012W211RT001 utilizes an LC network, rather than a single inductor or capacitor. This is done for two reasons; firstly, LC networks provide better impedance control and frequency response over a range of frequencies, and secondly, the inductor helps to minimize voltage spikes.

The MEM2012W211RT001 can be used in a wide variety of applications, from protecting consumer electronics to industrial applications. In consumer electronics items such as TVs, radios, and computers, the MEM2012W211RT001 filter can be used to reduce the amount of EMI/RFI interference that can cause the item to malfunction. In industrial applications, it can be used on motors or other high-power electrical components, where the filter can help reduce the amount of interference, and thus the chance of motor failure.

The MEM2012W211RT001 is an effective EMI/RFI filter that can be customized to a variety of applications. It is designed with a Low Pass LC Network and can be used for a wide range of frequencies, up to 200MHz. It is also designed for high-power applications up to 8A, making it suitable for industrial applications as well. The MEM2012W211RT001 is a very effective way to reduce the amount of EMI/RFI interference, allowing for more reliable and safe operation of your circuit.

The specific data is subject to PDF, and the above content is for reference