MF52C104F4150-G410

Series:	MF52
Packaging:	Bulk
Part Status:	Active
Resistance in Ohms @ 25°C:	100k
Resistance Tolerance:	±1%
B Value Tolerance:	±1%
B0/50:	--
B25/50:	4150K
B25/75:	--
B25/85:	--
B25/100:	--
Operating Temperature:	-55°C ~ 125°C
Power - Max:	50mW
Length - Lead Wire:	7.87" (200.00mm)
Mounting Type:	Through Hole
Package / Case:	Bead

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Temperature Sensors - NTC ThermistorsNTC thermistors, or Negative Temperature Coefficient thermistors, are kind of semiconductor which usually used for temperature sensing device, like the MF52C104F4150-G410. This thermistor has been used widely in circuits where measuring temperature is required.A NTC thermistor works by detecting changes in electrical resistance based on changes in temperature. This means that when temperature increases, the resistance value decreases. This is inverse to the metal sensing properties and PTC thermistors which increase the resistance with changes in temperature. As the temperature increases, the conductivity of the thermistor material will increase as well as its resistance.Typically the thermistor material is composed of ceramic, metal oxides, and other compounds and goes through a series of firing processes to enhance the sensors ability to detect temperature changes. The resistance value of the MF52C104F4150-G410 is 17.9Ω at 25°C. It is important to note that the resistance value becomes lower as the temperature becomes higher and higher. The thermistor is also fairly linear in its temperature response.Due to the high accuracy and broad temperature measuring range from -45°C to 150°C, the MF52C104F4150-G410 is most commonly used in applications like temperature sensing, temperature control and over-temperature protection. It has a wide variety of uses including in air conditioners, ovens, refrigerators, car radiators and heating systems.In applications such as air conditioners, the thermistor is used to sense the temperature of the air leaving from the evaporator. This enables the air conditioner to provide optimal cooling with minimal energy consumption. The thermistor activates an alarm when temperatures rise above the pre-set parameters.Refrigerator can also benefit from the thermistors. The thermistor can be used to detect the temperature inside the refrigerator and can ensure that it does not get too cold. The same principle can be used in ovens, where the thermistor is used to measure the temperatures inside the oven and shut off the heating element when temperatures reach the upper limit.In car radiators, the thermistor is used to measure the temperature of the coolant that circulates throughout the engine. The rising temperature will be detected by the thermistor and will activate the fan to cool the engine, this ensures the engine is always operating at an optimal temperature.The MF52C104F4150-G410 thermistor can also be used in heating systems. In these systems, the thermistor can sense the temperature of the heated element and turn off the heater when the set temperature has been reached.Overall, the MF52C104F4150-G410 thermistor is an important sensor in many temperature sensing applications due to its extreme accuracy and wide temperature range. It is used in air conditioners, ovens, refrigerators, car radiators and heating system. As it detects changes in temperature, it can be used to provide optimal cooling, and to ensure the system is operating within the pre-set temperature range.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description