MFR200DRE52-1M

Series:	MFR
Packaging:	Tape & Reel (TR)
Part Status:	Active
Resistance:	1 MOhms
Tolerance:	±0.5%
Power (Watts):	2W
Composition:	Metal Film
Features:	--
Temperature Coefficient:	±50ppm/°C
Operating Temperature:	-55°C ~ 155°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.197" Dia x 0.610" L (5.00mm x 15.50mm)
Height - Seated (Max):	--
Number of Terminations:	2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors: MFR200DRE52-1M

Through hole resistors (THR) are used in many applications, and the MFR200DRE52-1M is no exception. This type of resistor is designed with two leads that are soldered into a through-hole, making it one of the higher quality types of resistors available. Depending on their application, these resistors can be used for a variety of purposes, including voltage control, current control, impedance control, and thermal management. In addition, these resistors are available in a range of different sizes and are available in both single and dual-lead configurations.

Working Principle

As mentioned, MFR200DRE52-1M resistors are two-lead resistors that are soldered into a through-hole. It can be used in either a single-lead or dual-lead configuration, depending on the application. When in single-lead configuration, the resistor is connected to a single power source, and the voltage and current is regulated by the resistor. When the lead configuration is dual, the voltage is divided between the two leads, ensuring a more even voltage distribution.In both lead configurations, the resistor works by providing resistance to the flow of electricity. This resistance is measured in terms of Ohms. The more Ohms, the more resistance the resistor provides. The amount of resistance needed will depend on the application. A larger resistance will be needed in applications where higher voltages are involved.

Application Field

Due to its versatility, the MFR200DRE52-1M resistor is suitable for use in a range of different applications. The calibration of the voltage and current levels can be fine-tuned using the two leads, making it suitable for applications that require precise control of the voltage levels. This makes it ideal for use in voltage regulators, voltage boosters, and instrumentation control systems.In addition, this type of resistor can also be used for impedance control, where it is used to balance the impedance across two points. This is useful for controlling the power flow to specific devices and can also be used to reduce transmission line losses. In addition, it can be used to stabilize power grids and to ensure a safe load for amplifiers.Furthermore, these resistors are also suitable for use in thermal management applications. By regulating the power flow, the resistor can act as a heat sink, dissipating unwanted heat and thus improving the thermal efficiency of a system. This is especially useful for applications where high power levels are involved, such as in high-power LED lighting systems.

Conclusion

Overall, the MFR200DRE52-1M through hole resistor is an extremely versatile component that can be used for a range of different applications. It can be used for voltage, current, and impedance control, as well as for thermal management purposes. The two-lead configuration allows for precise voltage and current control, making it suitable for use in high-power systems. Additionally, it can also be used for impedance control, helping to balance loads and reduce transmission line losses.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description