MFR25SFRE52-32K4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors provide an extremely accurate and reliable means of maintaining predetermined electrical resistance in circuits and have become a staple of use in electrical and electronic systems. The MFR25SFRE52-32K4 is a particularly high-quality resistors that offers low power consumption, a wide range of operating temperatures, a very low maximum capacitance, and frequency ranges up to 3MHz. This piece of hardware is especially useful in applications that require careful control over the electrical resistance in the circuit.

The MFR25SFRE52-32K4 is a so-called “through-hole” resistor. This type of resistor is characterized by the fact that its leads are inserted and soldered in the circuit board by passing through the predrilled holes. This type of resistor is relatively easy to manufacture and install, allowing it to be produced at an affordable cost. Through-hole resistors can also withstand relatively high surge currents and temperatures, which can be important in applications where conditions may otherwise cause minor design or performance issues.

The MFR25SFRE52-32K4 is a special type of through-hole resistor known as a surface-mount resistor. These resistors are specifically designed to be secured to the surface of the circuit board, as opposed to being inserted into a through-hole. This reduces the installation process from the traditional drilling and soldering process to a much less tedious and complex surface-mounting technique. This has obvious benefits in terms of time and cost savings during manufacture and deployment.

The MFR25SFRE52-32K4 also has a relatively low power consumption. This type of resistor consumes very little power and is often used in applications involving low current operation. This range of resistors also offers a relatively wide range of operating temperatures. High-temperature conditions can put quite a strain on resistors, and these resistors are designed to operate even at temperatures as high as 150 degrees Celsius without any adverse effects to their electrical properties.

The maximum capacitance of the MFR25SFRE52-32K4 is another desirable feature of this resistor range. Capacitance is a phenomenon that refers to the ability of a component to accumulate electrical charge. This capacitance can have a significant impact on the performance of the circuit; if it is too high, the circuits may become unstable or produce unsatisfying results. The MFR25SFRE52-32K4 is designed with an extremely low maximum capacitance, meaning that it does not generate any electrical instability and can be used in the most demanding applications.

Finally, the MFR25SFRE52-32K4 is capable of operating at frequencies as high as 3MHz. This frequency range is far higher than most through-hole resistors, as they are usually limited to much lower frequencies. As a result, the MFR25SFRE52-32K4 can be used in applications that require very high-speed signal processing and are otherwise not possible to implement with traditional resistors.

The MFR25SFRE52-32K4 is an advanced and reliable resistor with excellent electrical properties. Its through-hole mounting technique, its low power consumption, wide range of operating temperatures, very low maximum capacitance, and frequency range up to 3MHz make it an ideal choice for demanding applications. Its versatility and reliability make it an undeniably attractive option for anyone in need of a reliable resistor.

The specific data is subject to PDF, and the above content is for reference