MFR2WSFTF52-205K

Series:	MFR
Packaging:	Tape & Box (TB)
Part Status:	Active
Resistance:	205 kOhms
Tolerance:	±1%
Power (Watts):	2W
Composition:	Metal Film
Features:	--
Temperature Coefficient:	±100ppm/°C
Operating Temperature:	-55°C ~ 155°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.177" Dia x 0.453" L (4.50mm x 11.50mm)
Height - Seated (Max):	--
Number of Terminations:	2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are essential but often overlooked components of modern electronics. The MFR2WSFTF52-205K is an example of a through-hole resistor in its most basic form. This MFR2WSFTF52-205K resistor can be used in many different forms in both industrial and consumer electronics. This article will discuss the application field and working principle of the MFR2WSFTF52-205K through-hole resistor. We will also take a look at its construction and design considerations to help you make the best choice for your project.The MFR2WSFTF52-205K is a through-hole resistor that is used in a variety of applications, including but not limited to industrial and consumer electronics. The applications for the MFR2WSFTF52-205K are diverse, including radio frequency (RF) circuits, power supply regulation, power distribution circuits, high voltage circuits, audio circuits, and automatic machinery circuits.The operational principle of the MFR2WSFTF52-205K is based on the resistance principle of Ohm’s law, which states that the current flowing through a conductor is proportional to the voltage applied across it. This means that by varying the voltage applied to the resistor, the current flow through it can be varied accordingly. The MFR2WSFTF52-205K is designed with a given value of impedance, which defines the amount of resistance offered by the resistor to current flow.The MFR2WSFTF52-205K is constructed with two lead wires, one grounded and one connected to the resistor. The resistor is constructed using a thin film of metal over an insulator. Thin layers of metal are formed in a grid pattern and these grids are then insulated to reduce the resistance across the resistor. The resistive material is usually composed of non-conductive materials such as ceramic and glass. The resistive materials are then sealed with a plastic coating.When selecting a through-hole resistor for a particular project, a few design considerations should be taken into account. First, consider the power requirements of the circuit, as well as the current handling capability. It is also important to consider the temperature range for the resistor, and the maximum power dissipation for the resistor. Also, consider the voltage rating of the resistor and its tolerance; higher values of resistance and greater tolerances require more complex designs.Finally, the size and shape of the resistor should be taken into account; if the device is used in a compact space, then a smaller size and a more compact design may be necessary. Additionally, the place on the printed circuit board (PCB) where the resistor will be soldered should also be carefully determined.The MFR2WSFTF52-205K through-hole resistor is an invaluable component in many industrial and consumer electronics projects. It is available in a wide range of resistance values and with various tolerances, making it suitable for a variety of applications. Its construction and design considerations should be carefully analyzed when selecting one for a specific project. When properly chosen and used, the MFR2WSFTF52-205K can provide reliable, consistent, and accurate performance in any project.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description