
Allicdata Part #: | 734-1138-ND |
Manufacturer Part#: |
MG-100-A-MD-R |
Price: | $ 129.94 |
Product Category: | Sensors, Transducers |
Manufacturer: | SSI Technologies Inc |
Short Description: | SENSOR DIGITAL GAUGE 100PSI LCD |
More Detail: | Pressure Sensor 100 PSI (689.48 kPa) Vented Gauge ... |
DataSheet: | ![]() |
Quantity: | 1000 |
5 +: | $ 118.12500 |
Series: | MG-MD |
Part Status: | Active |
Pressure Type: | Vented Gauge |
Operating Pressure: | 100 PSI (689.48 kPa) |
Output Type: | Wheatstone Bridge |
Output: | 4 mA ~ 20 mA, LCD Display |
Accuracy: | ±0.25% |
Voltage - Supply: | 12V |
Port Size: | Male - 1/4" (6.35mm) NPT |
Port Style: | Threaded |
Features: | Temperature Compensated |
Termination Style: | -- |
Maximum Pressure: | 300 PSI (2068.43 kPa) |
Operating Temperature: | -10°C ~ 60°C |
Package / Case: | Module Box with Display |
Supplier Device Package: | MediaGauge |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Pressure sensors and transducers measure the amount of pressure applied by a gas or liquid against a surface, and are commonly used in laboratory, industrial and manufacturing fields. The MG-100-A-MD-R is a pressure-transducer from Measurement Devices Limited (MDL), designed to measure absolute pressure and also rotate in relation to the measurement surface.
The MG-100-A-MD-R is useful in a wide range of industrial and laboratory applications, including industrial process control, pressure management, leak detection, product flow, and monitoring of chemical and gaseous levels. It is also useful in scientific studies, where the pressure and position of reaction surfaces are of interest.
The MG-100-A-MD-R transducer uses a piezoresistive-type sensing element integrated into a stainless steel pressure housing. This type of pressure sensing technique, often referred to as Wheatstone bridge-type, detects the relative resistance variation as pressure varies. This produces a variable frequency output which is converted to a voltage signal by an enclosed Integrating Circuit (IC). The sensed voltage is transmitted to the measuring electronics device, where the numerical value of the pressure is displayed.
This pressure transducer is sensitive to pressure ranges from 2 PSI to 100 PSI, and includes features such as temperature compensation, and a removable pressure vent. The temperature compensation allows for an accurate response across a wide range of temperatures, making it suitable for use in a wide range of applications. The removable pressure vent permits the transducer to be easily serviced and installed without the need for additional parts, and also enables pressure calibration in the field.
The MG-100-A-MD-R pressure transducer is also highly reliable, particularly when used in very hazardous conditions. It features a hard wearing stainless steel body that is resistant to corrosion and wear, and also eliminates the need for complicated and expensive materials in its construction. Additionally, it has a low-noise electronic design that produces low-noise signals, meaning it can operate in areas with high noise levels without negatively affecting the signal-to-noise ratio.
In summary, the MG-100-A-MD-R pressure transducer from Measurement Devices Limited offers accurate and reliable measuring capability in a stainless steel housing. It can be used for a variety of industrial and laboratory applications, including process control, pressure management, and measurements of chemical and gaseous levels. It is also useful in scientific studies, and offers temperature compensation and a removable pressure vent for easy installation and service.
The specific data is subject to PDF, and the above content is for reference
SST PRESSURE TRANSDUCERPressure Sensor

PRSSR TRNS 0-100BR 4-20MA DINPressure Se...

BRD MNT PRESSURE SENSORSPressure Sensor ...

BRD MNT PRESSURE SENSORSPressure Sensor ...

HEAVY DUTY PRESSURE TRANSDUCERPressure S...

BRD MNT PRESSURE SENSORSPressure Sensor ...
