MG-1000-A-MD-R

Series:	MG-MD
Part Status:	Active
Pressure Type:	Vented Gauge
Operating Pressure:	1000 PSI (6894.76 kPa)
Output Type:	Wheatstone Bridge
Output:	4 mA ~ 20 mA, LCD Display
Accuracy:	±0.25%
Voltage - Supply:	12V
Port Size:	Male - 1/4" (6.35mm) NPT
Port Style:	Threaded
Features:	Temperature Compensated
Termination Style:	--
Maximum Pressure:	3000 PSI (20684.27 kPa)
Operating Temperature:	-10°C ~ 60°C
Package / Case:	Module Box with Display
Supplier Device Package:	MediaGauge

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Pressure Sensors, TransducersPressure transducers are a common type of electrical transducer used in industrial and laboratory settings to measure pressure. The MG-1000-A-MD-R is an example of such a pressure transducer. It is a high-performance miniaturized differential pressure transducer designed to measure low-voltage, low-power signals across a wide range of ranges and applications. It is suitable for use in a variety of applications, including process control, instrumentation, and manufacturing.The MG-1000-A-MD-R consists of two core components: a transducer element and a “back-end” signal conditioning electronics unit. The transducer element is a high-precision, low-noise, low-cost diaphragm-type differential pressure sensor. The diaphragm is bonded to a rigid housing and acts as a pressure transducer, detecting the change in pressure from a given pressure supply. The signal conditioning unit, on the other hand, is responsible for digitizing, amplifying, and buffering the pressure signal from the transducer element.The transducer element has a variety of pressure range options, from ±5 mbar to ±100 mbar, depending on the application. It operates by measuring the difference in pressure between two points using a Wheatstone bridge circuit. The Wheatstone bridge has four resistors connected in a symmetrical arrangement, and any change in the pressure of one point relative to the other can be detected by changes in the bridge’s voltage. This is then converted to an electrical signal that can be read out as an output.The signal conditioning unit takes the signal from the transducer element and amplifies it, buffers it, and digitizes it. It also has signal conditioning options such as filtering, linearization and temperature compensation to ensure that the output signal is of the highest possible quality. The output signal can be read directly, or it can be sent to a controller or process control system. The MG-1000-A-MD-R can be used in a wide variety of applications, from measuring air pressure to water pressure in a pipe.The MG-1000-A-MD-R has a few key advantages over traditional pressure transducers. It is very accurate, reliable, low-cost, and low-maintenance, making it ideal for applications where accuracy of the data is critical and cost savings is desired. Additionally, it is highly temperature-compensated and thus well-suited for use in applications where temperature is variable or unknown. Moreover, its miniature size and low power requirements make it ideal for embedded and mobile applications, such as those used in energy-harvesting or medical devices.In conclusion, the MG-1000-A-MD-R is a high-performance, miniature differential pressure transducer. Its low cost, accuracy, small size, low power requirements, and temperature compensating make it an ideal choice for a variety of applications, including process control, instrumentation, medical, and energy-harvesting.

The specific data is subject to PDF, and the above content is for reference