Allicdata Part #: | MG2FA4M70-ND |
Manufacturer Part#: |
MG2FA4M70 |
Price: | $ 0.16 |
Product Category: | Resistors |
Manufacturer: | Stackpole Electronics Inc. |
Short Description: | RES 4.7M OHM 2W 1% AXIAL |
More Detail: | 4.7 MOhms ±1% 2W Through Hole Resistor Axial Flame... |
DataSheet: | MG2FA4M70 Datasheet/PDF |
Quantity: | 1000 |
1000 +: | $ 0.14963 |
Series: | MG |
Packaging: | Tape & Box (TB) |
Part Status: | Active |
Resistance: | 4.7 MOhms |
Tolerance: | ±1% |
Power (Watts): | 2W |
Composition: | Metal Film |
Features: | Flame Retardant Coating, High Voltage, Moisture Resistant, Safety |
Temperature Coefficient: | ±100ppm/°C |
Operating Temperature: | -55°C ~ 175°C |
Package / Case: | Axial |
Supplier Device Package: | Axial |
Size / Dimension: | 0.197" Dia x 0.610" L (5.00mm x 15.50mm) |
Height - Seated (Max): | -- |
Number of Terminations: | 2 |
Failure Rate: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
。Through Hole Resistors are used in a wide variety of devices and machines to provide electrical resistance. The MG2FA4M70 is a type of through-hole resistor that is designed to control current flow. It is commonly used in equipment that requires precise voltage regulation and temperature control.
The MG2FA4M70 provides precise electrical resistance and features a low-temperature coefficient to provide a stable current flow over a wide range of temperatures. The resistor is made from a ceramic cell with a ceramic substrate, which gives it better tolerance against thermal shock, vibration, and extreme temperature changes. This makes it suitable for applications where a high level of accuracy is required.
The MG2FA4M70 is available in several different package sizes and configurations to meet the needs of various applications. It is a relatively small component, which makes it easy to mount onto a circuit board. It is also capable of handling currents up to 5A, which makes it an ideal choice for many electronic systems.
The MG2FA4M70 is a through-hole resistor that is commonly used for precision voltage and current regulation, such as in industrial, medical, consumer and automotive electronics. It is widely used to provide voltage between two points or to control the speed of a motor. It is also ideal for controlling the amount of current in a variety of devices, such as power supplies and audio amplifiers.
The resistance value of the MG2FA4M70 is determined by the amount of resistance material that is used in the resistor. This is typically a mixture of silver and manganese, which gives the resistor a wide range of temperature dependent resistance values. The resistance value can be adjusted with a resistor selection chart.
The MG2FA4M70 works by introducing a fixed amount of resistance between two points in a circuit. This resistance can be adjusted by changing the temperature of the resistor. When the resistance of the resistor is increased, it restricts the current flow, while decreasing the resistance reduces the current flow.
The MG2FA4M70 is a reliable and accurate resistor that can be used in a variety of applications. It is easy to install, requires minimal maintenance, and is designed to handle a range of currents. It is an ideal choice for a variety of through-hole resistor applications.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
RES WW 7W 5% TH68 kOhms 5% 7W Through Ho...
RES WW 7W 5% TH1.3 Ohms 5% 7W Through Ho...
RES 24.9 OHM 1/4W 1% AXIAL24.9 Ohms 1% 0...
RES 2.8 OHM 3W 0.5% WW AXIAL2.8 Ohms 0.5...
RES 750K OHM 1/4W 1% AXIAL750 kOhms 1% 0...
RES 340 OHM 1W 1% WW AXIAL340 Ohms 1% 1W...