Allicdata Part #: | MG2FT300M-ND |
Manufacturer Part#: |
MG2FT300M |
Price: | $ 0.74 |
Product Category: | Resistors |
Manufacturer: | Stackpole Electronics Inc. |
Short Description: | RES 300M OHM 2W 1% AXIAL |
More Detail: | 300 MOhms ±1% 2W Through Hole Resistor Axial Flame... |
DataSheet: | MG2FT300M Datasheet/PDF |
Quantity: | 1000 |
5000 +: | $ 0.66420 |
Series: | MG |
Packaging: | Tape & Reel (TR) |
Part Status: | Active |
Resistance: | 300 MOhms |
Tolerance: | ±1% |
Power (Watts): | 2W |
Composition: | Metal Film |
Features: | Flame Retardant Coating, High Voltage, Moisture Resistant, Safety |
Temperature Coefficient: | ±100ppm/°C |
Operating Temperature: | -55°C ~ 175°C |
Package / Case: | Axial |
Supplier Device Package: | Axial |
Size / Dimension: | 0.197" Dia x 0.610" L (5.00mm x 15.50mm) |
Height - Seated (Max): | -- |
Number of Terminations: | 2 |
Failure Rate: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The MG2FT300M is constructed of a single sheet of metal foil in order to reduce the ESR by reducing the series resistance of the resistor. The metal foil is then coated with an insulating dielectric or ceramic material. The metal foil is then connected to contact points at either end of the resistor for connection to electrical connections. This design provides an excellent performance in terms of accuracy, low voltage loss, and low noise.
The working principle of this resistor is very simple. The resistor’s metal foil is placed between two conductor plates and a current is applied to one end of the resistor. The other end of the resistor is connected to a load. As the current travels through the resistor, it generates heat. This heat dissipates into the surrounding medium, allowing the resistor to remain at a steady temperature and to maintain its resistance value.
The MG2FT300M features excellent temperature stability and accuracy. This allows for highly precise and accurate measurements when used in circuit designs. This type of resistor also offers excellent overload protection, meaning that it can handle higher amounts of current than other types of through-hole resistors. This means that it is well-suited for applications that require high accuracy and maximum reliability.
The MG2FT300M is designed for use in a variety of applications. Its excellent temperature stability and accuracy make it ideal for precision analog circuits. It is commonly found in precision voltage and current regulation circuits, as well as in audio, power, and signal conditioning applications. It is also used in low frequency switching and motor control circuits, providing great accuracy and reliability.
The MG2FT300M is a reliable and versatile through-hole resistor that is used in a variety of applications. Its construction of a single sheet of metal foil results in a low series resistance, and its insulating dielectric or ceramic coating provides excellent overload protection and temperature stability. It is also highly accurate and offers excellent voltage and current regulation. This makes it well-suited for a range of applications, from audio and signal conditioning to motor control and power supplies.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
RES WW 7W 5% TH68 kOhms 5% 7W Through Ho...
RES WW 7W 5% TH1.3 Ohms 5% 7W Through Ho...
RES 24.9 OHM 1/4W 1% AXIAL24.9 Ohms 1% 0...
RES 2.8 OHM 3W 0.5% WW AXIAL2.8 Ohms 0.5...
RES 750K OHM 1/4W 1% AXIAL750 kOhms 1% 0...
RES 340 OHM 1W 1% WW AXIAL340 Ohms 1% 1W...