MGA-100-A-9V-R Allicdata Electronics
Allicdata Part #:

734-1160-ND

Manufacturer Part#:

MGA-100-A-9V-R

Price: $ 62.37
Product Category:

Sensors, Transducers

Manufacturer: SSI Technologies Inc
Short Description: SENSOR DIGITAL GAUGE 100PSI LCD
More Detail: Pressure Sensor 100 PSI (689.48 kPa) Vented Gauge ...
DataSheet: MGA-100-A-9V-R datasheetMGA-100-A-9V-R Datasheet/PDF
Quantity: 64
1 +: $ 56.70000
5 +: $ 53.86500
10 +: $ 49.61250
25 +: $ 43.94250
50 +: $ 42.52500
100 +: $ 41.10750
Stock 64Can Ship Immediately
$ 62.37
Specifications
Series: MG-9V
Part Status: Active
Pressure Type: Vented Gauge
Operating Pressure: 100 PSI (689.48 kPa)
Output Type: Wheatstone Bridge
Output: LCD Display
Accuracy: ±1%
Voltage - Supply: 9V
Port Size: Male - 1/4" (6.35mm) NPT
Port Style: Threaded
Features: Temperature Compensated
Termination Style: --
Maximum Pressure: 300 PSI (2068.43 kPa)
Operating Temperature: -10°C ~ 60°C
Package / Case: Module Box with Display
Supplier Device Package: MediaGauge
Description

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Pressure Sensors, Transducers: MGA-100-A-9V-R Application Field and Working Principle

The MGA-100-A-9V-R is a pressure sensor that belongs to the category of pressure transducers. It is designed for measurement and control applications and can be used to measure water or gas pressure in industrial, agricultural and municipal settings. Its small size and long-term stability make it suitable for use in a variety of applications.

Overview

The MGA-100-A-9V-R is a differential pressure transducer, meaning it measures the difference between two pressures. It is composed of two parts: a fast response membrane and a reference chamber. It is capable of measuring pressures of up to 25 psi (1.74 bar). The pressure range, resolution, and accuracy of the MGA-100-A-9V-R depend on the specific model; models are available for resistive or voltage output.The MGA-100-A-9V-R is constructed with sintered steel and epoxy, and can be either flush or threaded. It is designed to be compatible with most standard electronic components, and can fit into restricted spaces. The device is sealed from dust and moisture for maximum performance and reliability.

Applications

The MGA-100-A-9V-R is suitable for water or gas pressure measurement in industrial, agricultural, and municipal settings. It is designed for use with digital and analog instruments such as flow meters, controllers, and recorders. It can be used for water level measurements, water depth measurements, pressure drop measurements, and liquid flow measurements. It can also be used to measure the pressure differential between two points in pipelines and ducts, and between two tanks or vessels.The MGA-100-A-9V-R is also suitable for use with hydraulic and pneumatic systems. It can measure pressure levels in pipe lines, fluid systems, air reservoirs, and cylinders. Other applications include laboratory experiments, gas mixing and conditioning, and research and development.

Working Principle

The MGA-100-A-9V-R works on the principle of differential pressure measurement. When two pressures are applied to the device, the deflection of the membrane (measured relative to the reference chamber) is detected as an electrical signal. This signal is then converted to an analog or digital output by the electronics in the device.The membrane is made of a flexible material, such as polyethylene or polycarbonate. When a pressure difference is applied across the membrane, it flexes, and the amount of flexion is proportional to the pressure differential. This flexion is detected by the electronics in the device, which converts it to an electrical signal. The signal is then amplified and converted to an analog or digital output.The MGA-100-A-9V-R is designed to be highly accurate and stable, and requires minimal calibration or maintenance. It has a long-term stability of less than 0.03% of full-scale, and a maximum error of less than 0.4% of full-scale.

Conclusion

The MGA-100-A-9V-R is a pressure transducer that can be used for measuring water or gas pressures. It is suitable for industrial, agricultural, and municipal settings, and for a variety of applications such as water level measurement, pressure drop measurement, and liquid flow measurements.The device works on the principle of differential pressure measurement, and is composed of two parts: a fast response membrane and a reference chamber. It is designed to be accurate and stable, and requires minimal calibration or maintenance.

The specific data is subject to PDF, and the above content is for reference

Latest Products
9781101

SST PRESSURE TRANSDUCERPressure Sensor

9781101 Allicdata Electronics
IPSU-G1003-5

PRSSR TRNS 0-100BR 4-20MA DINPressure Se...

IPSU-G1003-5 Allicdata Electronics
SSCSLNT001BD3A3

BRD MNT PRESSURE SENSORSPressure Sensor ...

SSCSLNT001BD3A3 Allicdata Electronics
SSCMRRN005NDAA5

BRD MNT PRESSURE SENSORSPressure Sensor ...

SSCMRRN005NDAA5 Allicdata Electronics
PX2EG1XX040BSCHX

HEAVY DUTY PRESSURE TRANSDUCERPressure S...

PX2EG1XX040BSCHX Allicdata Electronics
NBPMANS100MGUNV

BRD MNT PRESSURE SENSORSPressure Sensor ...

NBPMANS100MGUNV Allicdata Electronics