MGN2A-DC110

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Power relays are devices that use a small amount of electrical power to activate a switch that can control a much higher load.The MGN2A-DC110 is such a device, with an applied power of 110V AC and a switch that can manage a load of up to 2 Amps.This relay can be used for a wide variety of applications, such as controlling switchgear, auto-start switches and AC monitors.In this article, we’ll take a closer look at the MGN2A-DC110, exploring its technical specifications, applications, and working principle.

Technical Specifications

The MGN2A-DC110 has a voltage rating of 110V AC, a current rating of 2 Amps, and an SPDT contact configuration.It has a 24V DC coil, a dielectric strength rating of 1,500V min, and an operating temperature range of 0-70°C.The relay has an inrush current of 15A and a 12-pin DIN41612 / AMP connection.It is UL rated, CSA certified, and CE marked, and weighs in at approximately 500g.It comes with screw terminals for quick and easy connections, and can be used in industrial, commercial and residential applications.

Applications

The MGN2A-DC110 can be used in a variety of applications, such as industrial motor controls, HVAC/R, lighting systems, and automotive applications.It can be used to switch high current loads such as capacitors and transformers, as well as control relays for stair lifts, irrigation systems, and other home automation systems.In addition, it can be used to control AC motors, pumps, compressors, and other electromechanical equipment.

Working Principle

The MGN2A-DC110 is a single pole double throw (SPDT) relay, meaning it has one “common” terminal and two “normally open” and “normally closed” contacts. When the relay is energized, a small amount of power is supplied to the coil, causing an electromagnet to be generated, and this creates a magnetic field. This magnetic field attracts the armature, which connects the two normally open and normally closed contacts, allowing the current to flow and the device to be activated. Once the relay has been activated, the current is switched from the normally open contacts to the normally closed contacts, and the device is turned off.The MGN2A-DC110 also has a diode built into it, which helps to filter out any spurious voltages that may be present in the circuit, and helps to protect the relay from any damage.

Conclusion

In conclusion, the MGN2A-DC110 is an electromechanical relay, with a voltage rating of 110V AC and a current rating of up to 2 Amps.It is UL rated,CSA certified, and CE marked, and can be used in a variety of applications, such as industrial motor controls, lighting systems and home automation systems.It has a 24V DC coil, and works on the principle of an electromagnet attracting and connecting two normally open and normally closed contacts, allowing the current to flow and the device to be activated.

The specific data is subject to PDF, and the above content is for reference