MIC2025-2BMM-TR

Voltage - Supply (Vcc/Vdd):	Not Required
Base Part Number:	MIC2025
Supplier Device Package:	8-MSOP
Package / Case:	8-TSSOP, 8-MSOP (0.118", 3.00mm Width)
Operating Temperature:	-40°C ~ 85°C (TA)
Fault Protection:	Current Limiting (Fixed), Over Temperature, UVLO
Features:	Slew Rate Controlled, Status Flag
Input Type:	Non-Inverting
Rds On (Typ):	90 mOhm
Current - Output (Max):	500mA
Series:	MM8™
Voltage - Load:	2.7 V ~ 5.5 V
Interface:	On/Off
Output Type:	N-Channel
Output Configuration:	High Side
Ratio - Input:Output:	1:1
Number of Outputs:	1
Switch Type:	General Purpose
Part Status:	Discontinued at Digi-Key
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

MIC2025-2BMM-TR: The MIC2025-2BMM-TR is a Power Distribution Switch, Load Driver, and Overvoltage and Overcurrent Protector. It provides a low-noise, low-loss switching solution for applications in battery management, industrial sensor systems, and high-efficiency power supplies.The MIC2025-2BMM-TR is a bidirectional switch, load driver, and overvoltage/overcurrent protector. The device features a low dropout voltage, low on-resistance, and low noise. The on-resistance of the switch is reduced to a minimum by optimized design and Schottky diodes are used to limit overvoltage and overcurrent. The MIC2025-2BMM-TR is suitable for a wide range of applications including battery charging and protection, overload protection for motors and other loads, industrial sensors, and power supply system navigation. The MIC2025-2BMM-TR features a P-channel MOSFET and an N-channel MOSFET in a single device. Each transistor can be individually switched by a digital input signal or pulse-width modulation (PWM). The FETs are controlled via two separate enable signals (EN1 and EN2), and full range control is provided by the shared enable input (EN). The MIC2025-2BMM-TR also features an adjustable over-voltage protection and over-current protection, allowing it to be used in a variety of applications. The device also incorporates a shutdown logic circuit which can be used to turn off both FETs simultaneously. The MIC2025-2BMM-TR can be used to provide switching and load driving in a wide range of applications. It is well suited for use in battery management, industrial sensor systems, and high-efficiency power supplies. The device can withstand voltages up to 28V and is capable of handling currents up to 250mA. It is available in a small-size package and is RoHS-compliant. The MIC2025-2BMM-TR is part of the MIC2500 family of switching and general-purpose circuits. The device is designed to provide low noise, low loss switching and drive capabilities, along with over voltage and overcurrent protection, in high-efficiency, cost-effective applications. The device is easy to use, and the wide variety of features make it an ideal solution for a variety of applications. In conclusion, the MIC2025-2BMM-TR is an ideal choice for battery management, industrial sensor systems and high efficiency power supplies. It provides a low dropout voltage, low on-resistance, and low noise, making it suitable for a wide range of applications. The device can withstand voltages up to 28V, and is capable of handling currents up to 250mA. The built-in overvoltage and overcurrent protection allows for greater flexibility and protection in applications, and the shutdown logic circuit enables both FETs to be turned off simultaneously. The small package size and RoHS-compliant design add additional convenience and value. The MIC2025-2BMM-TR is a cost-effective, feature-rich Power Distribution Switch, Load Driver, and Overvoltage and Overcurrent Protector, making it an excellent choice for a variety of applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description