MIC2075-2YM-TR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MIC2075-2YM-TR is a load driver, power distribution switch, and load switch typically used in a variety of electronic applications. It is a dual P-channel MOSFET (Metal-Oxide-Semiconductor Field Effect Transistor) that enables power redistribution between two power rails. Additionally, the device is able to drive loads equal to or greater than 500 mA (current overload protection is configured using an external resistor).

The MIC2075-2YM-TR works by allowing two separate power rails to be connected, disconnected, or switched on and off. The switching is done by controlling the gate, the voltage between the drain and gate of the MOSFET. When connected, current can be routed between the two power rails. When switched off, the MOSFET acts as a break in the circuit and prevents current from flowing. The gate voltage is controlled by a signal pin and can be used to activate the switch or turn it off.

The MIC2075-2YM-TR can be used in a variety of applications where two separate power rails need to be connected or disconnected. It can be used in automotive and industrial applications, home automation, and consumer electronic devices. It can also be used in distributed-power systems, common in industrial systems such as printing and processing machines, where the control of a wide range of power rails is required.

The device features latch-off (Soft Shutdown) protection by automatically pulling its gate low if the input pin is open. This protects against short circuit or current overload. It also features a Power Good indicator and a Configurable Fault Response which allows the output to be latched OFF in the event of a fault. This can be used to protect sensitive or critical components by disconnecting them in the event of a fault.

In summary, the MIC2075-2YM-TR is a load driver, power distribution switch, and load switch typically used in a variety of electronic applications. It can be used in distributed-power systems, common in industrial systems such as printing and processing machines, where the control of a wide range of power rails is required. The device can also be used in automotive and industrial applications, home automation, and consumer electronic devices. It features latch-off (Soft Shutdown) protection, a Power Good indicator, and a Configurable Fault Response to protect sensitive or critical components.

The specific data is subject to PDF, and the above content is for reference