MIC2098-1YMT-TR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MIC2098-1YMT-TR is a load-switched load-driver and power-distribution switch designed to provide a robust solution for power management in many different types of systems.

This device can generate a current up to 3A and switch low side or high side power distribution. Switching is done by a P-channel MOSFET for LOW side and an N-channel MOSFET for HIGH side that are controlled by the logic states of two control pins; IN1 and IN2.

The two control inputs, IN1 and IN2, operate at a voltage range of 0 to 10V, allowing the device to be used with TTL and CMOS logic. In addition, these control inputs include an internal voltage clamp that protect the MOSFETs from potential over-voltage damage.

The MIC2098-1YMT-TR is designed to operate as a load switch or a load driver, depending on the input logic states. When used as a load switch, the device can be used to control the distribution of power between two separate sources, routing power to the desired output. When used as a load driver, the device can control multiple loads from a single source.

The device includes two enable pins, EN1 and EN2, which enable or disable the device by applying logic states 0 or 1 to the enable pins. In addition, the device has an internal thermal protection that will automatically disable the device if the temperature exceeds the limit of 125°C.

The MIC2098-1YMT-TR is an ideal solution for power management in various applications including: personal computers, mobile phones, industrial equipment, and other models with different power requirements and system designs.

The working principle of the MIC2098-1YMT-TR is based on the use of two MOSFETs, one P-channel and one N-channel. When both MOSFETs are enabled, they act as a "dual pole" switch and allow current to flow from the input to the output. If one of the control pins (IN1 or IN2) is pulled, either the P-channel or N-channel MOSFET is disabled and the current flow is interrupted. The device also incorporates two enable pins, EN1 and EN2 that allow the logic states of the control inputs to be ignored, preventing current flow.

The MIC2098-1YMT-TR provides a comprehensive solution for power management and is an ideal device for both load switch and load driver applications. This device is capable of controlling the distribution of power, driving multiple loads from one source, and protecting against potentially damaging over-voltage conditions.

The specific data is subject to PDF, and the above content is for reference