MIC23153-GYMT-TR

Voltage - Input (Max):	5.5V
Supplier Device Package:	10-TMLF® (2.5x2.5)
Package / Case:	10-UFDFN Exposed Pad, 10-TMLF®
Mounting Type:	Surface Mount
Operating Temperature:	-40°C ~ 125°C (TJ)
Synchronous Rectifier:	Yes
Frequency - Switching:	4MHz
Current - Output:	2A
Voltage - Output (Max):	--
Voltage - Output (Min/Fixed):	1.8V
Series:	HyperLight Load®
Voltage - Input (Min):	2.7V
Number of Outputs:	1
Output Type:	Fixed
Topology:	Buck
Output Configuration:	Positive
Function:	Step-Down
Part Status:	Discontinued at Digi-Key
Packaging:	Cut Tape (CT)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

MIC23153-GYMT-TR voltage regulator

The MIC23153-GYMT-TR voltage regulator is a DC-DC switching regulator designed to be used in portable battery-powered applications. It provides a wide range of output voltage ranges, from 0.8V to 6V, and a maximum output current of 1.5A. The MIC23153-GYMT-TR also features a variety of protection features such as input undervoltage lockout, overvoltage protection, reverse current protection, over-temperature protection, and output current limiting. It also has an internal soft start circuit and spread spectrum mode for reduced switching noise.The MIC23153-GYMT-TR is a charge-pump based step-down DC-DC converter. The basic operation and components of the DC-DC converter are very similar to the traditional linear regulator, but it has significant efficiency improvements over a linear regulator.The MIC23153-GYMT-TR voltage regulator is a switch-mode regulator, which means that it uses a continuously variable transistor to control the power output. When the output is not needed, the transistor is turned off and no current flows through the system. When the output is required, the transistor is turned on by the control circuitry, which causes a current to flow through the system that is proportional to the control voltage. Since the transistor is not providing any resistance, the current will be equal to the voltage at the output divided by the resistance of the load.The MIC23153-GYMT-TR also has a wide range of features, such as a low-ripple mode, which allows it to run much quieter than a traditional linear regulator. It also has adjustable cycle-by-cycle current limiting, enabling it to protect against overcurrent conditions. The device also has a synchronous rectifier to improve efficiency and allows the use of external components such as an inductor and capacitor to optimize the output current and voltage ripple.To maximize its efficiency, the MIC23153-GYMT-TR has an adjustable switching frequency, ranging from 300kHz to 2.2MHz. This allows the user to optimize the device for the specific application.The MIC23153-GYMT-TR also has external clock synchronization capability, so it can be synchronized to an external clock source. This feature is useful in applications where multiple DC-DC converters need to be aligned with each other.To reduce power dissipation, the MIC23153-GYMT-TR has a shutdown mode and two low-power modes, “Light Load” and “Light Load 2”. The shutdown mode allows the device to be shutdown when not in use, and the “Light Load” and “Light Load 2” allow for ultralow power dissipation when light load is applied.Finally, the MIC23153-GYMT-TR has adjustable soft/exponential ramps for both rising and falling edges of the output voltage. This helps reduce output voltage disturbances during start up and shut down.The MIC23153-GYMT-TR is an ideal power solution for portable devices such as PDAs and other handheld devices. It can also be used in a variety of other applications, such as automotive, industrial, communications, and telecommunications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description