MIC23250-SKYMT-TR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MIC23250-SKYMT-TR is a product costing under three dollars, and a member of the DC DC Switching Regulators family with the prefix MIC. It is a type of PMIC, or Power Management IC. It is an integrated device packaged in one strip for regulating the output voltage from an internal power source.

The MIC23250-SKYMT-TR is an IC with a low noise Buck-Boost DC/DC converter with key features such as low inrush current and adjustable input voltage range. The chip provides a low-noise and constant output voltage, with an input voltage of 3.3V to 20V, and an adjustable output that ranges between 0.9V and VIN.

The device offers a high degree of accuracy and precision, with variations in programmed output voltage as low as ±2.5 mV over temperature and line variations. This allows the device to be employed in a variety of applications, ranging from motor speed control to active devices heat regulation, interfacing to devices with different power levels, and even as an emergency power supply.

The MIC23250-SKYMT-TR is designed to take maximum advantage of current available technologies. It incorporates advanced power saving techniques, such as Burst and Sleep modes, as well as a hysteretic current-mode control to minimize output ripple on noisy inputs. The low-noise boost feature with load disparagement enables high efficiency, low output voltage ripple, fast transient response and low output capacitor.

Working Principle:

The working principle of the MIC23250-SKYMT-TR is as follows. The device is structured to act as a pulse-width modulated (PWM) switch, with a control circuitry that determines the on/off cycle for the MOSFETs, thus providing a continually regulated output voltage.

The device starts off in Burst mode, where it pulses the MOSFET at a fixed frequency of 1.5 MHz, reducing the output ripple. When the output voltage drops below a certain level, the IC enters Sleep mode, where the device can draw as minimum as 30uA. When the output voltage rises above a certain level, the device enters a Run mode, where the MOSFETs will open and close as driven by the internal PWM controller.

In order to regulate the output voltage, the IC uses a combination of hysteretic and current-mode control. Hysteretic control is used to ensure that the output voltage does not exceed the set range, while current-mode control is used to guarantee that the output ripple does not spike or fall out of bounds. In the case of load changes or input voltage variations, the IC\'s current-mode control allows for fast transient response, dynamically compensating for the load or input signal changes.

In summary, the MIC23250-SKYMT-TR is a unique member of the DC DC Switching Regulators family. It offers control, output voltage range adjustment and a low-noise operation. The device is suitable for power supply design in motor speed regulation, device intervention ranging from different voltage levels, and emergency power.

The specific data is subject to PDF, and the above content is for reference