MIC2562A-1YTS

Voltage - Supply (Vcc/Vdd):	Not Required
Base Part Number:	MIC2562A
Supplier Device Package:	16-TSSOP
Package / Case:	16-TSSOP (0.173", 4.40mm Width)
Operating Temperature:	-40°C ~ 85°C (TA)
Fault Protection:	Current Limiting (Fixed), Over Temperature
Features:	Status Flag
Input Type:	Non-Inverting
Rds On (Typ):	70 mOhm
Current - Output (Max):	200mA
Series:	--
Voltage - Load:	3.3V, 5V, 12V
Interface:	Logic
Output Type:	N-Channel
Output Configuration:	Low Side
Ratio - Input:Output:	3:2
Number of Outputs:	2
Switch Type:	PCMCIA Switch
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

MIC2562A-1YTS Power Distribution Switches, Load Drivers

The MIC2562A-1YTS is a versatile, reliable power management IC (PMIC) that can be used as a power switch in a variety of applications. With its wide operating range and high switching speed, it is suitable for continuous current sink, source, and latch drivers, as well as for general power distribution switches and drivers. This article will explore the features and applications of the MIC2562A-1YTS in more detail, including its working principle.The MIC2562A-1YTS offers numerous features that make it a great choice for power distribution and for load drivers. It has a wide input voltage range of 2.5V to 24V and can support up to 2A of continuous output current. It is also able to withstand a peak current surge of 6A for a period of 10ms. The device features an adjustable on-time of up to 50ms, making it ideal for a variety of fast switching applications. Moreover, the device has a minimum power-on reset time of 100ms, making it suitable for applications that require quick response times.The MIC2562A-1YTS power switch is a very reliable device and has been tested under harsh conditions including high temperature, humidity, and shock. It also offers high ESD protection to ensure that it can safely handle high input voltages. In addition, the device is RoHS compliant and UL recognized, making it suitable for a wide range of applications.The MIC2562A-1YTS can be used in a variety of applications. It has been designed for industrial, consumer, automotive and medical applications. It can be used as a power switch for high-current loads, or as a load driver in general power switching applications. It is also a great choice for battery-powered systems, since it can be used as a power switch to reduce power consumption. Additionally, it can be used as a low power supply for delayed outputs and logic switching applications. It is important to note that the MIC2562A-1YTS is equipped with an advanced fail-safe mode. This ensures that the output current cannot exceed the safe operating level, even in the event of a fault. This is an important feature, as it helps to prevent damage to the device or any downstream circuitry in the event of an overcurrent event.The working principle of the MIC2562A-1YTS is simple. The device has two inputs: enable and toggle. When the enable input is high, the device is in an active ON state and the power switch is closed. When the toggle input is low, the device is in an OFF state, and the power switch is open. The enable input is active low, so a low input drives the switch to an ON state. The toggle input is also active low, so a low input will drive the device to an OFF state. When the device is turned ON, the output voltage will immediately rise to the input voltage, while the current will rise slowly, depending on the load. When the device is turned OFF, the output voltage will immediately drop to 0V and the current will decrease gradually to the quiescent level. The MIC2562A-1YTS is able to provide a high switching speed, and can handle switching frequencies up to 10KHz.In summary, the MIC2562A-1YTS is a reliable, versatile PMIC that can be used as a power switch in a variety of applications. It has a wide input voltage range, high switching speed, and can handle a peak current surge of 6A for a period of 10ms. It features an adjustable on-time of up to 50ms, can withstand harsh environmental conditions, and has a fail-safe mode that prevents current overloads. The device can be used in industrial, automotive, medical, and other applications as a power switch, load driver, or low power supply. Its working principle is simple: an active low input on the enable terminal drives the switch to an ON state, while an active low input on the toggle terminal drives it to an OFF state.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description