MIC2564A-0YTS

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MIC2564A-0YTS Power Management Integrated Circuit (PMIC) is a load driver and power distribution switch. It is designed to be used in digital consumer and industrial applications. The device is capable of operating from supply voltages as low as 1.5V and is capable of switching currents up to 1.5A and operating temperature range from -40 °C to +125 °C.

The MIC2564A-0YTS is offered in a small form factor and provides power for portable and other applications with stringent board-space constraints. The device has an integrated low dropout linear regulator (LDO) to regulate and provide power to on-chip peripherals and other components. The LDO can support input supply voltages up to 14V. The LDO has selectable output voltage and can be used as an output buffer to provide power to peripheral components or as a module power supply.

The MIC2564A-0YTS has two power switches which can be used to switch the power supply to different parts of the board or to various components. The input supply voltage can be regulated by the internal LDO and an external voltage control pin can be used to vary the output voltage. The output voltage can range from 0.8V to14V depending on the input supply voltage. Also, the output current of each switch can be controlled by using an external current limit protection circuitry.

The MIC2564A-0YTS also has an integrated power-on reset (POR) feature which can be used for start-up, system recovery or battery monitoring. The POR is activated when the supply voltage reaches a pre-defined threshold which is variable through an external resistor. The POR signal is active-high and can be used to reset the system by signaling a microcontroller or other components.

The MIC2564A-0YTS also has a wide selection of operating modes which support various system requirements. The operating modes include deep-sleep, sleep and fast-wake modes. The deep-sleep mode is used when the system is idle or in an inactive state. The sleep mode is used when the system is in standby. And the fast-wake mode is used when the system needs to be woken up quickly to respond to an external event.

The MIC2564A-0YTS also includes a power monitoring and sequencing feature which allows the PMIC to be used in a variety of power management applications. The power sequencing feature allows the system to sequentially turn on peripherals and components as needed. The power monitoring feature allows the PMIC to detect and monitor the input supply voltage and can be used to detect and report irregular conditions or critical fault conditions.

In summary, the MIC2564A-0YTS is a small form factor PMIC that provides power distribution and driver functions for digital applications. It has an integrated LDO and power switches to regulate and provide power to on-chip and other components. The device also has an integrated power-on reset feature and a variety of operating modes which provide power saving and system monitoring capabilities. The MIC2564A-0YTS is a cost effective solution for low-power applications such as digital consumer and industrial applications.

The specific data is subject to PDF, and the above content is for reference