MIC2564A-1BTS

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MIC2564A-1BTS is a product of Microchip Technology, Inc. and is a member of their Power Management Integrated Circuits (PMIC) family of products. It is a type of Power Distribution Switch, Load Driver, and is well-suited for a variety of applications.

The MIC2564A-1BTS is a single-pole, normally-open (1P NO) switch designed for use in switched power distribution systems. It has an operating voltage range of 4.3V to 24V and an output current of up to 2.6A. It can be controlled by an external signal with a logic level of 0.4 V to 1.4 V. When the signal is low, the switch is closed and current can flow through the switch. When the signal is high, the switch is open and current will not flow.

The MIC2564A-1BTS has a number of features that make it a great choice for a variety of applications. It has built-in protections to prevent short circuits and short circuit currents. It also has thermal protection to prevent the temperature from rising too high. It also has overvoltage and undervoltage protection to ensure that the power levels remain within a safe range. In addition, it has an EMC-compliant design to reduce potential interference in the system.

The MIC2564A-1BTS is also designed to be easy to use and install. It has an onboard control pin (IN pin) that can be used to control the switch. It also has a ground pin that must be connected to ensure proper functioning of the switch. The switch is low in quiescent current and has a low current rating, making it a great choice for applications where power consumption needs to be kept to a minimum.

The MIC2564A-1BTS is a great choice for a variety of applications, such as motor control and robotics, power-sensitive medical equipment, automotive, and industrial applications. It is a reliable and cost-effective solution for many different types of applications.

The specific data is subject to PDF, and the above content is for reference