MIC2595-2BM

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Power management on the board is essential for the reliable operation of many different types of equipment. Power management is particularly crucial for hot-swap applications, where it is necessary to connect electronic components in and out of circuits as fast as possible with very minimal disruption to the electrical environment. That’s where MIC2595-2BM hot swap controllers come in. The MIC2595-2BM hot swap controllers are designed to provide optimal power management during the connection and disconnection of loads on PCBs. They provide accurate control over current and inrush current, overvoltage protection, and the ability to operate safely in high-temperature environments. This makes them an ideal choice for hot swap applications.

The MIC2595-2BM hot swap controllers are part of Microchip’s Intelligent Power Switch (IPS) family of products. The IPS products enable intelligent power sequencing and sequencing/protection of power supplies using a single IC, including protection for both DC-DC converters and high-power FETs. The MIC2595-2BM hot swap controllers are designed to provide fast, accurate, and reliable control over current and inrush current in hot swap applications. They offer a cost-effective solution for managing power when connecting and disconnecting active elements such as ICs, FPGAs, and ASICs, and they are also able to operate in high-temperature environments.

The working principle of the MIC2595-2BM hot swap controllers is based on the concept of using a charge pump to monitor the voltage and current in a circuit. The charge pump generates a voltage ramp whose slope is proportional to the current flowing through the circuit. This ramp is then compared to a preset reference voltage, and the output from the comparison is used to control the switch in the circuit. The result is that the inrush current is limited, and the output voltage is regulated to the desired level.

The MIC2595-2BM hot swap controllers are available in two different versions, depending on the application for which they will be used. The first version, the MIC2595-2BM-S, is designed for use in applications where the supply voltage is up to 30V. The second version, the MIC2595-2BM-H, is designed for use in applications with supply voltages up to 60V. Both versions have an in-output range of 0V to 30V, and they also have a built-in current sense amplifier to allow for the monitoring of current in the circuit.

The MIC2595-2BM hot swap controllers can provide protection against overvoltage, undervoltage, overcurrent, and thermal overload. They also have a built-in voltage offset feature which allows the user to adjust the circuit’s external feedback loop and overvoltage protection level. The MIC2595-2BM hot swap controllers also feature a wide input voltage range and an adjustable slew rate which can be used to adjust the current limit and the ramp up time.

The MIC2595-2BM hot swap controllers are suitable for use in a wide range of applications, including server applications, printer and router circuits, voltage transient protection and load management applications. They are also ideal for DC/DC and buck-boost converter circuits, as well as for temporarily switching components on or off in hot swap applications. The MIC2595-2BM hot swap controllers are available in a range of packages and are easy to integrate into any hot swap application.

The specific data is subject to PDF, and the above content is for reference