MK3PV-5-S-AC50

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Power relays come in a variety of sizes and packages to fulfill a wide range of applications. MK3PV-5-S-AC50 is one such type of power relay specifically designed to handle applications up to 50 A or 250 V DC/AC. It is a double pole, single throw, double break relay. This article will talk about the general application field and working principle of the MK3PV-5-S-AC50 power relay.

TheMK3PV-5-S-AC50 relay primarily finds application in motor control applications such as electric motor starter systems. Moreover, it can be used in cranes, lifts, tractors, conveyors etc. primarily for safety reasons as it has a high contact rating which allows considerable current flow. It is also suitable for controlling heating which includes ovens and crimpers.

The MK3PV-5-S-AC50 relay consists of two contact sets namely the NO (normally open) contact set and the NC (normally closed) contact set. The NO contact set is open in normal condition and closes on application of voltage. On the other hand, the NC contact set is closed in the normal condition and opens on application of voltage. The MK3PV-5-S-AC50 relay can also be used as a switching device. In this application, the contact set that opens on application of voltage could be used for switching a load on or off.

The operating principle of theMK3PV-5-S-AC50 relay relies on the electromagnetic effect. It consists of an electromagnet which is a coil of wire wrapped around a core. When current is passed through this coil, it creates a magnetic field which acts upon on the two contacts of the relay. The action of the magnetic field causes the contacts to change their state. When current is passed through the coil, it creates a stronger magnetic field which reduces the resistance between the contacts. This process of reduced resistance is known as inductive switching.

In conclusion, MK3PV-5-S-AC50 is an electromagnetic power relay used primarily for safety applications in motor control systems. It consists of an electromagnet and two contact sets. The coil of the electromagnet creates a magnetic field which causes the contacts to change their state on application of voltage. It can also be used as a switching device which helps in controlling various loads.

The specific data is subject to PDF, and the above content is for reference