MLV0805E30703T Circuit Protection

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MLV08050E30703T is a surface mount ESD TVS (Transient Voltage Suppressor) Varistor that offers protection against ESD (Electrostatic Discharge) transients. It is a very common part used in a wide range of applications as an ESD protection component. This TVS provides good high frequency performance and low capacitance, making it an ideal choice for a variety of applications such as consumer electronics, data equipment, and computer systems.

This ESD TVS Varistor is designed with two main components: a varistor (metal oxide or MOV) and two diodes. The varistor is a non-linear voltage dependent resistor that can absorb large surges of current. This component acts like a sponge-like device and dampens transient energy, thus providing some degree of protection from ESD. The two diodes are used to limit the voltage across the device at the time of an ESD event.

At normal operation, the TVS Varistor operates as an open circuit. That means it does not limit the flow of current within a system. It does not absorb any electrical energy and does not interfere with system performance. However, when an ESD event occurs, the varistor absorbs a large amount of the energy from the transient. This process of absorbing energy results in a clamping of the voltage levels until after the transient has passed. This will protect the device from further damage that could occur from an ESD event.

The MLV08050E30703T is capable of ESD protection up to 5,000V HBM (Human Body Model) and 8,000V CDM (Charged Device Model). This makes it suitable for a wide range of applications where ESD protection is needed. Common applications include consumer electronics, communication and networking products, and industrial products.

The majority of ESD Varistor components are classified as either EIA-481-3 or UL683 approved. The MLV08050E30703T is certified to UL663, making it a great choice for products requiring a UL safety certification. In addition, this part has a surge rating of 300V and a maximum clamping voltage of 79V, making it suitable for applications such as telephone line protection.

The MLV08050E30703T is a great choice for applications requiring both ESD protection and compliance with safety standards. Its high surge rating, low capacitance, and UL approved status make it a reliable choice for many different kinds of consumer electronics, communication, and industrial applications.

The specific data is subject to PDF, and the above content is for reference