MMA2301EGR2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Motion sensors are vital components in everyday products ranging from industrial to consumer products. One of the most widely used motion sensors is the Accelerometer, and the MMA2301EGR2 is a premium-grade digital accelerometer used for various applications. This article will explain the application field and working principle of the MMA2301EGR2.

The MMA2301EGR2 accelerometer is an ideal choice for applications such as control and monitoring of machine vibration, tilt measurements for Omni-directional sensing, and rotational sensing for angle displays. It is also suitable for medical applications including impact detection and posture monitoring.

The MMA2301EGR2 has four operating modes, namely Sleep Mode, Off Mode, Measurement Mode, and Standby Mode. In Sleep Mode, the accelerometer is off, while in Off Mode, the accelerometer is completely powered off. In Measurement Mode, the accelerometer is on and ready to measure accelerations. Finally, in Standby Mode, the accelerometer is in low-power mode and can wake up on demand.

The MMA2301EGR2 is composed of a two-axis selected range MEMS accelerometer with an I2C digital output. It features a low power consumption of 0.7 mA and high resolution of 13-bit. It is capable of providing measurements of up to ±2 g. This measurement range can be increased to ±4 g or reduced to ±1 g, depending on the application requirements.

The working principle of the MMA2301EGR2 is based on MEMS technology. It uses a mechanical sensing element to sense acceleration. The sensing element consists of a weight connected to a flexure hinge, which is fixed to a silicon structure via a micro-machined suspension system. The flexure hinge is suspended in the center of the micro-machined structure, and when an acceleration is applied, the weight moves, causing the flexure to bend. This movement is measured by a capacitive acceleration sensing detector, which sends a signal to the analog-to-digital (ADC) converter. The ADC converts the signal into digital format and transmits the data via the I2C port.

In summary, the MMA2301EGR2 is a high-performance digital accelerometer used for various applications such as machine vibration monitoring, tilt measurements, and rotational sensing. It features a low power consumption of 0.7 mA and high resolution of 13-bit, with a measurement range of up to ±2 g. The working principle of the MMA2301EGR2 is based on MEMS technology, using a sensing element to sense acceleration and a capacitive acceleration sensing detector to send a signal to the analog-to-digital converter.

The specific data is subject to PDF, and the above content is for reference