MMZ2012Y600BT000

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Ferrite Beads and Chips

The MMZ2012Y600BT000 is an example of a ferrite bead or chip, a component commonly used in electronic circuits for purposes of radio frequency (RF) interference suppression and noise cancelling. Ferrite beads and chips are used to filter out unwanted electromagnetic interference, including the likes of AC power line noise and cross-talk between two signals.

Structure of the MMZ2012Y600BT000

The MMZ2012Y600BT000 is a small ferrite bead designed to fit on a dual inward-mess leads, allowing it to be used with pins in smaller packages. This bead measures 0.5" × 0.2" × 0.125", with a center axial hole of 0.065". It draws 2.88 Ohms typical at 0.01MHz and 4.45 Ohms typical at 100MHz. It is also designed with a maximum current of 5 amperes.

Application Field of the MMZ2012Y600BT000

The MMZ2012Y600BT000 is used in a variety of electronic applications. It can be used as an EMI filter in DC/AC power supplies, as a noise filter in radio receivers and in data communication equipment such as modems, DSL and cable TV. It is also used to filter out noise caused by high frequency switching applications and ground loop issues. The MMZ2012Y600BT000 is a very effective and cost-efficient filter for suppressing common-mode and normal-mode EMI signals.

Working Principle of the MMZ2012Y600BT000

The MMZ2012Y600BT000 works by allowing signals to pass through the center outer part of the ferrite bead without significant attenuation, while the structures around the hole block most of the unwanted high-frequency electromagnetic interference. The MMZ2012Y600BT000 works by providing an impedance to the high frequency noise, which causes the noise to be diverted away from the signal path, preventing it from affecting the signal.

The MMZ2012Y600BT000 is a unidirectional component, meaning that it works more effectively with high-frequency AC signals over short distances. Unidirectional Ferrite beads are the best solution for RF EMI suppression in close proximity applications, such as between a cellular phone and its base station or in a notebook computer.

Conclusion

The MMZ2012Y600BT000 is a Ferrite Bead or Chip which works to suppress and cancel out unwanted radio frequency interference from a variety of electronic applications. By providing an impedance to the high frequency noise, it prevents it from interfering with the signal path, allowing the signal to pass unaffected. The MMZ2012Y600BT000 is used in many applications including DC/AC power supplies, radio receivers, data communication equipment, high frequency switching applications, and ground loop issues.

The specific data is subject to PDF, and the above content is for reference