MNR04M0ABJ510

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

MNR04M0ABJ510 is a resistor network that uses a resistor array set having 4 resistors, commonly known as a four-resistor array. Designed with multiple winding and winding to form a stable and efficient resistive unit, MNR04M0ABJ510 is usually used for gain adjustment, power distribution, current sensing, and frequency compensation. Its primary applications include commercial static digital systems, medical imaging equipment, industrial-grade equipment, and automotive control systems.

MNR04M0ABJ510 design

MNR04M0ABJ510 involves four resistors with series/parallel connection in a single array, where each resistor can be used independently or in combination. These resistors are arranged in a bridge-format configuration with two terminals at each end, allowing for both ease of connection and effective resistance measurement for the entire unit. These resistor networks allow for the adjustment of gain, noise filtering, and the stabilization of the current or voltage supply.

The individual resistors within the four-resistor array have a controlled error rate with low-tolerance trimming up to 5%, increasing precision and dynamic range. To ensure an even greater degree of precision and uniformity, these resistors have tight-tolerance trimming down to 0.5%. To provide further protection, these devices are hermetically sealed in a ceramic housing with thermal isolation between resistive elements to withstand environmental conditions and ensure high reliability over time.

MNR04M0ABJ510 working principle

The four-resistor array is designed to provide a stable current and voltage distribution throughout its resistive elements. This ensures a uniformity of operation and efficient limitations to the current, enabling precision over a wide range of frequencies. The resistors are arranged in bridge format to increase precision of signals in certain ranges, while also preventing unwanted cross-talk and distortion of the signal.

The resistive elements of the MNR04M0ABJ510 are designed to provide a current flow that is constant, irrespective of the load driven through them. This is achieved through a combination of series and parallel resistors that, together, create a single, stable reference point for the voltage and current supplied. The resistor array is designed to filter unwanted noise, reducing signal distortion and ensuring clean and precise signals are supplied.

The resistors within the bridge are also able to detect any discrepancies in the current or voltage, and subsequently adjust the resistance accordingly. This is a useful feature in applications where an even distribution of current is necessary, such as in automotive control systems or medical imaging. As the current or voltage starts to fluctuate, the resistor network will automatically adjust the resistance to maintain its stability.

Conclusion

The MNR04M0ABJ510 is a four-resistor array that provides a variety of applications including gain adjustment, power distribution, current sensing, and frequency compensation. It is designed with a high degree of precision, offering low-tolerance trim capabilities up to 5%, as well as tight-tolerance trimming down to 0.5%. Hermetically sealed in a ceramic housing, the resistor network is ideal for harsh and extreme environmental conditions, offering reliability over time. The resistors are connected in a bridge-format configuration and are designed to filter unwanted noise and distortion of the signal, ensuring a stable current and voltage distribution. This makes the MNR04M0ABJ510 a reliable and efficient resistor array, suitable for use in any application that requires precision over a wide range of frequencies.

The specific data is subject to PDF, and the above content is for reference