Allicdata Part #: | 725-1278-ND |
Manufacturer Part#: |
MP1C-3 |
Price: | $ 147.06 |
Product Category: | Sensors, Transducers |
Manufacturer: | Cynergy 3 |
Short Description: | AUTOCLAVE LEVEL SWITCH 3M |
More Detail: | Liquid Level Sensor Switch (Single Float) SPDT Out... |
DataSheet: | MP1C-3 Datasheet/PDF |
Quantity: | 1000 |
1 +: | $ 133.69200 |
Series: | MP1C |
Part Status: | Active |
Type: | Liquid |
Output Type: | Switch (Single Float) |
Output Configuration: | SPDT |
Current: | 250mA |
Switch Actuation Level: | -- |
Mounting Type: | Cable Mount |
Material - Housing & Prism: | High Density Polyethylene (PEHD) |
Operating Temperature: | 0°C ~ 55°C |
Voltage Rating: | 3V |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Float sensors are the most commonly used level sensors for measurement and control systems. They are reliable, cost-effective, and simple to install. The MP1C-3 float level sensors are designed for use in a variety of applications such as measurement in wastewater, oil and gas reservoirs, and automated boiler systems. They are particularly suitable for water level sensing in hazardous or explosive atmospheres.
The MP1C-3 float level sensors are designed to provide a reliable measure of the liquid level in a tank or vessel. They operate by measuring the liquid level and providing an electrical output that is proportional to the liquid level. This output can then be used to control pumps, valves, or other equipment within the system.
The MP1C-3 float level sensor consists of a float chamber, a float, and a float mechanism. The float chamber is made of a corrosion-resistant material and fitted with an O-ring to ensure a watertight seal. The float mechanism is designed to be accurately positioned within the chamber and is connected to an electrical signal that is sent to the controller.
The MP1C-3 float level sensor works by measuring the level of the liquid and providing an electrical signal to the controller. The float is connected to a rod which is positioned within the chamber. When the liquid level increases, the float rises and the rod is connected to the switch which signals the controller. When the liquid level decreases, the float falls and the rod disconnects from the switch, sending the signal to the controller.
The MP1C-3 float level sensor can be used in a variety of applications such as water and wastewater treatment plants, oil and gas reservoirs, and automated boiler systems. It is designed to provide a reliable measure of the liquid level in a tank or vessel and is particularly suitable for water level (or other liquid) sensing in hazardous or explosive atmospheres.
The MP1C-3 float level sensor is an easy to install, cost-effective, and reliable level sensor for use in a variety of applications. It operates by measuring the liquid level and providing an electrical output that is proportional to the liquid level. This output can then be used to control pumps, valves, or other equipment within the system. The MP1C-3 float level sensor is designed for use in hazardous or explosive atmospheres and is an ideal solution for level sensing applications.
The specific data is subject to PDF, and the above content is for reference
REED SENSOR W/INTEGRAL FLOATLiquid Level...
1.5 NPT FLTSW REED SSLiquid Level Sensor...
CABLE FLOAT HORZ SPST-NO 10ALiquid Level...
FLOATSWITCH HORIZ 1A NO/NC PPSLiquid Lev...
FLOAT SWITCH 25VA PPS 1M PVC NITLiquid L...
SWITCH CLS16 WHT L2000MM CBL 2MLiquid Le...