
Allicdata Part #: | 725-1279-ND |
Manufacturer Part#: |
MP1C-5 |
Price: | $ 160.72 |
Product Category: | Sensors, Transducers |
Manufacturer: | Cynergy 3 |
Short Description: | AUTOCLAVE LEVEL SWITCH 5M |
More Detail: | Liquid Level Sensor Switch (Single Float) SPDT Out... |
DataSheet: | ![]() |
Quantity: | 1000 |
1 +: | $ 146.11000 |
Series: | MP1C |
Part Status: | Active |
Type: | Liquid |
Output Type: | Switch (Single Float) |
Output Configuration: | SPDT |
Current: | 250mA |
Switch Actuation Level: | -- |
Mounting Type: | Cable Mount |
Material - Housing & Prism: | High Density Polyethylene (PEHD) |
Operating Temperature: | 0°C ~ 55°C |
Voltage Rating: | 3V |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Float and level sensors are versatile instruments for measuring the liquid levels in storage tanks, open sumps, and other containers. The MP1C-5 is a float and level sensor designed to accurately measure the presence and position of a float in these applications.
Application Field
The MP1C-5 float and level sensor is used for liquid level detection in wide range of open and closed containers. Typical applications include water level measurement in tanks, non-potable water level monitoring, sump pump float control, boilers, and open tanks. The MP1C-5 is also used in pump control applications, such as sump pump control, monitoring high/low water levels in irrigation tanks, and controlling pump run-time for timed filling applications.
Working Principle
The MP1C-5 typically consists of two components, a float coupled with a level switch. The float is attached to a lever arm and when the fluid reaches the float, the lever arm gives an indication of the liquid level in the container. The level switch is connected to the lever arm and is used to sense when the float rises or falls. When the float rises to a preset level, the level switch will activate an electrical signal indicating that the liquid level in the tank has been reached. The output of the signal can be used to activate a pump, switch on a light, or other system controls.
The MP1C-5 can be used with a variety of float materials, including polypropylene, stainless steel, and polyethylene. This variety of materials allows it to be used in a wide range of temperature and pressure conditions. It is also designed to be resistant to corrosion and abrasion, and can be used in applications with a wide range of viscosity liquids.
The MP1C-5 offers superior accuracy, and is designed to work in temperatures of up to 212°F (100°C). It is available in a variety of operating ranges and is suitable for applications requiring high accuracy and repeatability. It is easy to install, and can be used with a variety of mounting solutions, including direct bolt-down, or through panel mounting.
The specific data is subject to PDF, and the above content is for reference
REED SENSOR W/INTEGRAL FLOATLiquid Level...

1.5 NPT FLTSW REED SSLiquid Level Sensor...

CABLE FLOAT HORZ SPST-NO 10ALiquid Level...

FLOATSWITCH HORIZ 1A NO/NC PPSLiquid Lev...

FLOAT SWITCH 25VA PPS 1M PVC NITLiquid L...

SWITCH CLS16 WHT L2000MM CBL 2MLiquid Le...
