Allicdata Part #: | MP2918GF-ND |
Manufacturer Part#: |
MP2918GF |
Price: | $ 1.34 |
Product Category: | Integrated Circuits (ICs) |
Manufacturer: | Monolithic Power Systems Inc. |
Short Description: | 4V-40V INPUT, CURRENT MODE SYNCH |
More Detail: | Buck Regulator Positive Output Step-Down DC-DC Co... |
DataSheet: | MP2918GF Datasheet/PDF |
Quantity: | 1000 |
75 +: | $ 1.21279 |
Series: | -- |
Part Status: | Active |
Output Type: | PWM Signal |
Function: | Step-Down |
Output Configuration: | Positive |
Topology: | Buck |
Number of Outputs: | 1 |
Output Phases: | 1 |
Voltage - Supply (Vcc/Vdd): | 4 V ~ 40 V |
Frequency - Switching: | 100kHz ~ 1MHz |
Duty Cycle (Max): | 99.5% |
Synchronous Rectifier: | Yes |
Clock Sync: | Yes |
Serial Interfaces: | -- |
Control Features: | Enable, Frequency Control, Power Good, Soft Start |
Operating Temperature: | -40°C ~ 125°C (TJ) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The MP2918GF was designed to empower the latest process nodes and integrate full-fledged power sequencing on-chip (SoC) power management units (PMUs). This PMIC is part of the DC-DC Switching Controllers series of voltage regulators, and it serves to enhance the total power subsystem design by providing precise control of the SO-8 package with its excellent transient performance.
The MP2918GF is a voltage regulator IC that can reduce high-voltage sources down to low-voltage levels but can also step up low-voltage sources to higher levels. This voltage regulator can be used both as a buck converter and as a boost converter. It is designed to precisely control and monitor the voltage on a power rail using an external reference, and is used to regulate the power rails. The MP2918GF is capable of supplying power ranging from 1.8V to 6.5V.
The voltage regulator uses pulse width modulation (PWM) to convert power, allowing the circuitry to use a much smaller inductor than traditional LDO (low dropout voltage) regulators. It also utilizes a push-pull design, which allows for a more efficient operation than traditional buck-boost converters. This helps reduce both the cost and the complexity of the circuitry, making the MP2918GF an ideal choice for high-power applications.
When using the MP2918GF, the application designer has to provide an external control loop. This is applied by using a P-channel and an N-channel MOSFET, which switch the input voltage to either the high voltage or the low voltage, depending on the circuit\'s requirements. The application designer can configure the MP2918GF by programming the required output voltage and current, as well as the desired frequency of operation. The frequency must remain constant throughout the application or else errors can occur.
The MP2918GF can be used in a number of applications, including mobile phones, laptops, tablets, and other portable electronic devices. It is also used in automotive applications, as it is capable of providing precise control of the power rails. The IC can also be used to provide power sequencing in Motor Control IC applications, as it can be programmed to control and monitor the voltage on the power rails of the IC. In lighting applications, the MP2918GF can be used to deliver a constant voltage to LEDs, making them more energy efficient.
By using the MP2918GF, application designers can enjoy the benefits of reduced design complexity, cost, and power dissipation in their power subsystems. This PMIC provides precise control of the power rails, ensures high-efficiency conversion, and is capable of powering a wide range of applications. Whether controlling peripheral devices, providing power sequencing for motor control, or delivering maximum efficiency to LED lighting applications, the MP2918GF can provide the reliability, performance, and efficiency required.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
MP2908AGF-Z | Monolithic P... | -- | 1000 | 4V-60V INPUT, CURRENT MOD... |
MP2908AGF | Monolithic P... | -- | 75 | 4V-60V INPUT, CURRENT MOD... |
MP2905EK-LF-Z | Monolithic P... | -- | 1000 | IC REG BUCK ADJ SYNCBuck ... |
MP2908AGL-Z | Monolithic P... | 0.82 $ | 1000 | 4V-60V INPUT, CURRENT MOD... |
MP2905EK-LF | Monolithic P... | 1.08 $ | 1000 | HYSTERETIC SYNCH BUCK CON... |
MP2908AGL-P | Monolithic P... | 1.23 $ | 1000 | 4V-60V INPUT, CURRENT MOD... |
MP2932GQK-LF-Z | Monolithic P... | -- | 1000 | IC PWM CONTROLLER PMBUS- ... |
MP2930GQK-LF-Z | Monolithic P... | 1.49 $ | 1000 | IC PWM CONTROLLER PMBUS- ... |
MP2935DQK-LF-Z | Monolithic P... | 1.86 $ | 1000 | IC PWM CONTROLLER PMBUS- ... |
MP2953BGU-0000-Z | Monolithic P... | 1.99 $ | 1000 | IC PWM CONTROLLER PMBUS- ... |
MP2932GQK-LF-P | Monolithic P... | 2.02 $ | 1000 | IC PWM CONTROLLER PMBUS- ... |
MP2930GQK-LF-P | Monolithic P... | 2.11 $ | 1000 | IC PWM CONTROLLER PMBUS- ... |
MP2935DQK-LF-P | Monolithic P... | 2.59 $ | 1000 | IC PWM CONTROLLER PMBUS- ... |
MP2953BGU-0000-P | Monolithic P... | 2.75 $ | 1000 | IC PWM CONTROLLER PMBUS- ... |
MP2918GL-Z | Monolithic P... | 0.6 $ | 1000 | 4V-40V INPUT, CURRENT MOD... |
MP2918GF-Z | Monolithic P... | -- | 1000 | 4V-40V INPUT, CURRENT MOD... |
MP2918GL-P | Monolithic P... | 0.99 $ | 1000 | 4V-40V INPUT, CURRENT MOD... |
MP2918GF | Monolithic P... | 1.34 $ | 1000 | 4V-40V INPUT, CURRENT MOD... |
MP2905EK-LF-P | Monolithic P... | 0.94 $ | 1000 | IC REG BUCK ADJ SYNCBuck ... |
Switching Controller Polyphase Bidirecti...
IC POWER MANAGEMENTBuck-Boost Regulator ...
IC REG CTRLR BUCK 8-PSOPBuck Regulator P...
IC REG CTRLR BUCK 16TSSOPBuck Regulator ...
IC REG CTRLR BUCK 14TSSOPBuck Regulator ...
IC REG CTRLR BUCK/SEPIC 32QFNBuck Regula...