Allicdata Part #: | MP9950DQ-LF-Z-ND |
Manufacturer Part#: |
MP9950DQ-LF-Z |
Price: | $ 0.42 |
Product Category: | Integrated Circuits (ICs) |
Manufacturer: | Monolithic Power Systems Inc. |
Short Description: | IC CURR LIMIT SWITCH 5A 10QFN |
More Detail: | N/A |
DataSheet: | MP9950DQ-LF-Z Datasheet/PDF |
Quantity: | 1000 |
5000 +: | $ 0.38543 |
Interface: | On/Off |
Operating Temperature: | -40°C ~ 125°C (TJ) |
Fault Protection: | Current Limiting (Adjustable), Over Temperature, Over Voltage, UVLO |
Features: | Status Flag |
Input Type: | Non-Inverting |
Rds On (Typ): | 40 mOhm |
Current - Output (Max): | 5A |
Voltage - Supply (Vcc/Vdd): | Not Required |
Voltage - Load: | 3 V ~ 15 V |
Series: | -- |
Output Type: | N-Channel |
Output Configuration: | High Side |
Ratio - Input:Output: | 1:1 |
Number of Outputs: | 1 |
Switch Type: | General Purpose |
Part Status: | Active |
Packaging: | Tape & Reel (TR) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
PMIC (Power Management Integrated Circuit) is a specialized device that takes a single power supply and manages it in order to provide multiple, filtered power sources to various parts of the system. Power Distribution Switches, Load Drivers, and Buck-Boost converters are all examples of PMIC products. Among these products, power switches and load drivers are commonly used in many consumer, industrial and medical applications. The MP9950DQ-LF-Z is one such power switch and load driver.
The MP9950DQ-LF-Z is a fully integrated, low voltage power switch designed for industrial and consumer applications where an efficient, low voltage power-on control is needed. It has built-in control and diagnostic features that enable easy design, integration, and trouble-free operation. This device is capable of controlling a single load of up to 10 amps and is ideal for driving motors, LEDs, power supplies, and other high-current loads.
The MP9950DQ-LF-Z utilizes a high-performance, low-noise switching architecture that combines low power consumption with high-speed switching. It is designed to withstand a maximum voltage of 60 Volts and is ESD protected up to 4KV. Additionally, it features short-circuit protection, and a thermal shutdown feature to protect the device from extreme temperatures or overloads. Finally, the device includes a number of diagnostic functions such as an over-temperature warning and a current sense function that allows for current monitoring and fault analysis.
The MP9950DQ-LF-Z is designed for a wide variety of applications where an efficient, programmable, low-voltage control is required. In industrial and automotive electronics, it can be used to control a variety of motors, power supplies, LEDs, and other high-current loads. In medical applications, it can be used in pumps, respirators, and other life-support devices. In consumer electronics, it can be used to control LCDs, backlights, and various other electronic devices.
The MP9950DQ-LF-Z is based on a unique working principle. It utilizes a negative charge pump to achieve a low voltage control between 2 and 4V. This allows for very efficient and low power consumption. The device is programmed by applying suitable voltage and frequency to its GATE pin. When the GATE pin is high, the embedded power MOSFET will switch on and drive the load current. The device then automatically reduces the load current and enters low consumption mode when the GATE pin is low. This allows for maximum throughput with minimum power consumption.
The MP9950DQ-LF-Z is a powerful, low voltage power switch and load driver which is ideal for a variety of industrial, automotive and consumer applications. It is designed to provide efficient and reliable control of motors, LEDs, power supplies, and other high-current loads. It features short-circuit protection, an over-temperature warning, and a unique working principle based on a negative charge pump that enables low power consumption and maximum throughput.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
MP9942GJ-Z | Monolithic P... | 0.73 $ | 3000 | IC REG BUCK ADJ 2A SYNCBu... |
MP9942AGJ-Z | Monolithic P... | 0.73 $ | 1000 | HIGH EFFICIENCY 2A,36V,41... |
MP9942AGJ-P | Monolithic P... | 1.13 $ | 1000 | HIGH EFFICIENCY 2A,36V,41... |
MP9943GQ-P | Monolithic P... | 1.16 $ | 1000 | IC REG BUCK ADJ 3A SYNCBu... |
MP9943AGQ-P | Monolithic P... | 1.16 $ | 1000 | HIGH EFFICIENCY 3A PEAK,3... |
MP9928GL-Z | Monolithic P... | -- | 5000 | 4V-60V INPUT, CURRENT MOD... |
MP9951DQ-LF-Z | Monolithic P... | -- | 1000 | 3V-15V, 1A- 5A PROGRAMMAB... |
MP9951DQ-LF-P | Monolithic P... | -- | 1000 | 3V-15V, 1A- 5A PROGRAMMAB... |
MP9950DQ-LF-Z | Monolithic P... | 0.42 $ | 1000 | IC CURR LIMIT SWITCH 5A 1... |
MP9950DQ-LF-P | Monolithic P... | -- | 1000 | IC CURR LIMIT SWITCH 5A 1... |
MP9928GF | Monolithic P... | 1.58 $ | 1000 | 4V-60V INPUT, CURRENT MOD... |
MP9928GF-Z | Monolithic P... | 0.85 $ | 1000 | 4V-60V INPUT, CURRENT MOD... |
MP9928GL-P | Monolithic P... | 1.11 $ | 1000 | 4V-60V INPUT, CURRENT MOD... |
MP9928GF-P | Monolithic P... | 1.23 $ | 1000 | 4V-60V INPUT, CURRENT MOD... |
MP9943AGQ-Z | Monolithic P... | -- | 5000 | HIGH EFFICIENCY 3A PEAK,3... |
MP9943GQ-Z | Monolithic P... | -- | 5000 | IC REG BUCK ADJ 3A SYNCBu... |
MP9942GJ-P | Monolithic P... | 1.13 $ | 1000 | IC REG BUCK ADJ 2A SYNCBu... |
EXPRESS CARD PWR SWITCH
PSC LOAD SWITCH V-DFN3030-10
IC DARL DRIVER ARRAY 4CH
IC USB POWER SWITCH 8MSOP
IC SW IPS 1CH HIGH SIDE D2PAK-5
IC SW IPS 1CH HIGH SIDE 8SOIC