Ethernet:	10 Mbps (4), 10/100 Mbps (1)
Base Part Number:	MPC860
Additional Interfaces:	HDLC/SDLC, I²C, IrDA, PCMCIA, SPI, TDM, UART/USART
Supplier Device Package:	357-PBGA (25x25)
Package / Case:	357-BBGA
Security Features:	--
Operating Temperature:	0°C ~ 95°C (TA)
Voltage - I/O:	3.3V
USB:	--
SATA:	--
Series:	MPC8xx
Display & Interface Controllers:	--
Graphics Acceleration:	No
RAM Controllers:	DRAM
Co-Processors/DSP:	Communications; CPM
Speed:	50MHz
Number of Cores/Bus Width:	1 Core, 32-Bit
Core Processor:	MPC8xx
Part Status:	Not For New Designs
Packaging:	Tray

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

MPC860PVR50D4 Application Field and Working Principle

Introduction

MPC860PVR50D4 is a microprocessor based on the PowerPC architecture which uses its advanced architecture to offer customers high performance, low cost and great scalability in various embedded applications. This processor is a cost-effective system-on-chip solution with built-in peripheral blocks as well as integrated system design. It can be used for such applications as automotive, consumer, industrial, and medical, as well as military and aerospace.

Application Field of MPC860PVR50D4

The MPC860PVR50D4 processor is used in a variety of embedded applications. Its features make it an ideal choice for certain automotive, consumer, industrial and medical applications. Automotive Embedded ApplicationsThe MPC860PVR50D4 processor is used in certain automotive applications where high performance and low cost are required. It is used in safety systems, and also powertrain, body electronics and infotainment systems. In particular, the processor can be used in automotive applications such as adaptive cruise control, lane keep assist and active suspension systems.Consumer Embedded ApplicationsThe processor is also suitable for consumer embedded applications such as smartphones, home theaters, game consoles, Internet of Things (IoT) and wearables. The processor is capable of performing smoothly in such embedded applications due to its high performance and low cost. Industrial Embedded ApplicationsThe MPC860PVR50D4 processor is used various industrial embedded applications. In particular, the processor is used in robotic systems and factory automation. It is also suitable for monitoring systems, medical devices and energy meters.Medical Embedded ApplicationThe processor is commonly used in medical embedded applications due to its low power consumption. It can be used in patient monitoring systems, medical imaging systems and portable medical instruments. The processor is also suitable for certain medical embedded applications where high performance and low power are essential, such as surgical systems, diagnostic systems and pharmaceuticals.

Working Principle of MPC860PVR50D4

The MPC860PVR50D4 is a microprocessor based on the PowerPC architecture. The processor operates on 64-bit floating-point architecture and supports symmetric multiprocessing (SMP). The processor uses 64-bit registers for efficient data-transfer operations. This enables multiple operations to occur in a single cycle, reducing the latency. The processor is built with a scalable clock frequency that ranges from 50 MHz to 125 MHz. This helps to reduce the power consumption and provides high performance depending on the application requirement. The resulting cost savings and performance enable customers to use the processor for a variety of embedded applications. The processor also supports 8 levels of caches. This helps to reduce the access latency and increase the data-transfer rate. The processor also comes with a level 2 memory controller and security extensions. The memory controller enables the processor to access memory rapidly and the security extensions provide protection against malicious attacks.The processor is equipped with an integrated system design, which reduces the latency and increases the performance by providing an efficient data-transfer rate. The processor also supports a wide range of peripheral blocks such as legacy peripherals and non-legacy peripherals. This helps to reduce the instruction set size and also provides better device compatibility. The processor comes with a low-power mode, which helps to reduce the power consumption during periods of inactivity. This helps to extend the battery life of portable applications.Finally, the processor also comes with on-chip debug module, which helps to reduce the development time and costs.

Conclusion

The MPC860PVR50D4 is a superior processor for embedded applications. Its processor architecture is designed for high performance and low power consumption. The processor also comes with integrated peripherals and a scalable clock frequency. These features make it an ideal choice for certain automotive, consumer, industrial and medical applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description