MPG06DHE3_A/53

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes are semiconductor devices that are capable of conducting current in only one direction and suppressing current from flowing from the opposite direction. The most common type of diodes are the Rectifier. A rectifier is a device that converts alternating current into direct current. Single rectifier diodes are designed for full-wave, half-wave and bridge rectifier applications.

The MPG06DHE3_A/53 is a single rectifier diode. It has a maximum peak reverse voltage of 600V, a maximum forward continuous current of 3A and a maximum forward voltage drop of 0.95V. It is widely used in DC power supplies, reverse-bias protection, and rectifying circuits.

Application field

The MPG06DHE3_A/53 is widely used in full-wave, half-wave and bridge rectifier applications. It can be used for DC power supplies for switching power supplies, motor drives, lighting inverters, temperature controllers, motor inverters, UPS, and other power electronic equipment. The diode can also be used for reverse-bias protection in a wide variety of applications.

Working principle

Rectifiers rely on the ability of a diode to conduct electric current in one direction, while inhibiting its flow in the opposite direction. The MPG06DHE3_A/53 is a single rectifier diode, meaning that it can be used in either a full-wave, half-wave or bridge rectifier configuration. In a full-wave rectifier circuit, two diodes are arranged in a “bridge” configuration and allow current to flow through both positive and negative cycles of the waveform. This results in a waveform that looks like a “carrier wave”, with the alternating waveform removed. In a half-wave rectifier circuit, only one diode is required, and it allows current to flow during only the positive half of the waveform. In a bridge rectifier circuit, four diodes are arranged in a bridge configuration and allow current to flow during both the positive and negative cycles of the waveform.

The MPG06DHE3_A/53 is designed to meet the electrical requirements for both full- and half-wave rectifier applications. It has a maximum peak reverse voltage of 600V, a maximum forward continuous current of 3A, and a maximum forward voltage drop of 0.95V. Its low voltage drop provides excellent power efficiency and low power loss. Its high current capability allows the diode to handle higher current than standard rectifier diodes, making it well-suited for power electronic applications.

In summary, the MPG06DHE3_A/53 is a single rectifier diode. It is designed for use in full-wave, half-wave and bridge rectifier applications. It has a maximum peak reverse voltage of 600V, a maximum forward continuous current of 3A, and a maximum forward voltage drop of 0.95V. Its low voltage drop and high current capability make it well-suited for DC power supplies, reverse-bias protection and rectifying circuits.

The specific data is subject to PDF, and the above content is for reference