MPLAD30KP130A Circuit Protection

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Transient Voltage Suppression (TVS) Diodes are an integral tool for protecting sensitive electronics. The MPLAD30KP130A from Littelfuse is a bi-directional TVS diode that is designed to protect against high-energy electrostatic discharge (ESD) events. Its main application field lies in its ability to protect from a surge of electronic noise, also known as Electrostatic Discharge (ESD) pulses, which can cause permanent damage to sensitive components. The diode is also compatible for use in other applications including inductive loads, over-voltage protection, reverse-polarity protection, and line-to-ground transient voltage transients.

The MPLAD30KP130A is capable of withstanding an ESD shock in excess of 30kV, before clamping voltage value. This makes it suitable for applications such as computers, modems, and other consumer electronics. The 30kV figure is based on a theoretical number for air discharge, in actual usage the device may be rated for protection up to 27kV for contact discharge and 25kV for indirect discharge. The MPLAD30KP130A also has a low capacitance of 0.7pF, making it ideal for use in high-speed communication interfaces.

The working principle of the MPLAD30KP130A is relatively simple. The device has a dedicated JFET connected to the cathode of the diode, and a simple zener diode connected to the anode region. During an ESD event, the transistor switches, allowing an avalanche breakdown and limiting the voltage across the diode to a safe level. This diversion of electricity from one region to the other helps protect sensitive integrated circuits, and dissipates excess energy. After the event has been dealt with, the diode returns to its normal state.

The MPLAD30KP130A is a highly reliable device, and can handle a full range of operating conditions. It has a wide operating temperature range of -65 degrees to +150 degrees Celsius. The device is also small and lightweight, measuring 0.5mm in height and weighing under 0.3 grams. It requires low voltage for operation, although this is dependent on the application. The diode has a low forward voltage drop of just 0.4V at 1A, and low crossover current of 35mA at 80V.

In conclusion, the MPLAD30KP130A is a bi-directional TVS diode from Littelfuse that is designed to protect delicate electronics from ESD pulses and other transient events. It is suitable for a wide range of applications, including modems, computers, and other consumer electronics. It has a dedicated JFET and zener diode built in, and an avalanche breakdown that helps limit the voltage to allow the diode to return to a safe level after an ESD event. The device is highly reliable, small, lightweight, and low-voltage, making it an ideal choice for protecting sensitive electronic components.

The specific data is subject to PDF, and the above content is for reference