Current - Peak Pulse (10/1000µs):	97A
Supplier Device Package:	Mini-PLAD
Package / Case:	Nonstandard SMD
Mounting Type:	Surface Mount
Operating Temperature:	-55°C ~ 150°C (TJ)
Capacitance @ Frequency:	--
Applications:	General Purpose
Power Line Protection:	No
Power - Peak Pulse:	7500W (7.5kW)
Series:	Military, MIL-PRF-19500
Voltage - Clamping (Max) @ Ipp:	77.4V
Voltage - Breakdown (Min):	53.3V
Voltage - Reverse Standoff (Typ):	48V
Unidirectional Channels:	1
Type:	Zener
Moisture Sensitivity Level (MSL):	--
Part Status:	Active

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

MPLAD7.5KP48A/TR TVS - Diodes

Introduction

MPLAD7.5KP48A/TR is a TVS diode (Transient Voltage Suppressor) the provides surge protection against high voltage transients. TVS diodes are designed to protect electronics circuits and components from the damaging effects caused by high-voltage spikes, ESD (Electrostatic Discharge) or other fault-induced transients. These components provide a low impedance path to ground when the voltage level reaches a certain peak, thus limiting further potential damage to the circuitry.

Application Fields

MPLAD7.5KP48A/TR TVS Diodes can be found in a wide variety of applications, from consumer electronics to automotive and telecommunications. These components can be used to protect printed circuit boards, assemblies and other components from electrical or electrostatic damage due to voltage spikes. They are designed to handle transients of up to 150 volts peak and 5000 watts peak, with a clamping voltage of 7.5 volts.Consumer electronics such as TVs, DVD players, and stereos as well as industrial and communications electronics can all benefit from the added protection of MPLAD7.5KP48A/TR. This protection is especially important in applications like cell phones and tablets, which are sensitive to ESD. Additionally, these components can be used in laboratory environments where sensitive electronic equipment is used.

Working Principle

When the voltage of the circuit reaches a certain peak, the breakdown voltage of the MPLAD7.5KP48A/TR diode, it triggers the component to start conducting. This allows the current to flow from the parasitic capacitance and inductance in the circuit through the diode. This causes current to flow through the diode, limiting the voltage and current from reaching other parts of the circuit. The large amount of current that flows also causes the TVS diode to dissipate a lot of heat, so it is important to ensure adequate heatsinking is provided.The MPLAD7.5KP48A/TR also features low capacitance, which is critical for providing ultra fast response times for ESD, EMI and other transient protection. The MPLAD7.5KP48A/TR can also provide protection from higher energy transients, such as lightning strikes.In all applications, it is important to select a TVS diode with the right specifications for the application. The clamping voltage should be low enough to provide adequate protection but high enough to not damage the circuit in the event of multiple large transients. It is also important to ensure that the TVS has the same impedance as the device being protected.

Conclusion

MPLAD7.5KP48A/TR TVS diode are an essential component in many applications where protection from transients is needed. These devices offer high peak power and voltage protection, and low capacitance for fast response times. They can be used in a wide variety of applications from consumer electronics to industrial and telecommunications equipment, and can be used to protect electrical and electrostatic damage from high voltage surges and ESD. It is important to ensure that the right specifications are selected for the application in order to provide adequate protection and not damage the circuit.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description