Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Resistor Networks, Arrays

MPM10019001AT1 is an integrated circuit (IC) of resistance network characterized by its high accuracy, low electrical noise and low power consumption. The resistance tolerance of the components in the network is very low. The device is designed for medical, automotive, communication and instrumentation applications. It can be used in many applications and systems including resistive measurement, data acquisition, signal conditioning, and fault detection.

Application Field of the MPM10019001AT1

MPM10019001AT1 is a popular resistive network IC typically used in medical equipment, automotive systems, data acquisition systems and instrumentation systems. It can be used for precision measurement and signal conditioning, fault detection, and control in such systems. It can also be used for resistive switching, and for other high precision resistive applications.

In medical applications, the device can be used to measure impedance or conductivity in medical imaging devices or for location of electrodes in anatomical studies. It is particularly useful in high resolution and accuracy applications. In automotive systems, it can be used in the engine controller, airbag controllers, brake control systems and climate control systems to measure temperature, pressure or to sense misalignment and other anomalies. In data acquisition systems, it can be used for switch/transducer signal conditioning and processing applications.

It can also be used in the instrumentation systems for resistive transducers and static/dynamic resistance measurements. For example, it can be used for fault detection in configurable low resistance bridges, for accuracy in low noise switches, and for accuracy in position or speed measurement using relative resistance measurements.

Working Principle of the MPM10019001AT1

The working principle of MPM10019001AT1 is based on the resistive network principle. It uses an array of resistors such as thin-film resistors to divide the applied voltage into multiple points on the array. The resistance value of these resistors will determine the voltage level at each point. For the precision resistive measurements, resistors with very low tolerance of resistance values need to be selected.

The resistive network is connected to an analog to digital converter (ADC) to measure the voltages at different points on the array. The ADC converts these voltages into digital values which are then read by the controlling device. The digital values are then compared to pre-set values to detect any fault or misalignment.

MPM10019001AT1 is able to operate over a wide temperature range and the resistive component of the network maintains its accuracy throughout the temperature range. It is fabricated using thin-film resistors which are very stable and low power consuming devices. The thin-film resistors are insulated and can withstand high temperature and pressure without damage.

Conclusion

The MPM10019001AT1 is an integrated circuit of a high precision resistive network typically used in many types of applications and systems. It is designed for use in medical, automotive, communication and instrumentation applications. It is based on the resistive network principle and uses thin-film resistors with a very low resistance tolerance. It operates over a wide temperature range and its accuracy is maintained through temperature changes. The MPM10019001AT1 is a low power consuming device and can be used in many applications and systems for voltage measurements, signal conditioning, and fault detection.

The specific data is subject to PDF, and the above content is for reference