MPM1003AT1

Number of Pins:	3
Height - Seated (Max):	0.040" (1.02mm)
Size / Dimension:	0.113" L x 0.051" W (2.86mm x 1.30mm)
Supplier Device Package:	SOT-23
Package / Case:	TO-236-3, SC-59, SOT-23-3
Mounting Type:	Surface Mount
Applications:	Voltage Divider (TCR Matched)
Operating Temperature:	-55°C ~ 125°C
Temperature Coefficient:	±25ppm/°C
Power Per Element:	100mW
Series:	MPM
Resistor-Ratio-Drift:	±2 ppm/°C
Resistor Matching Ratio:	±0.05%
Number of Resistors:	2
Tolerance:	±0.1%
Resistance (Ohms):	50k
Circuit Type:	Voltage Divider
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Resistor Networks, Arrays

MPM1003AT1 is a common three-loop electronic resistor with a wide range of applications and working principles. It is composed of two connected linear resistors (R1 and R2) and a third bendable curved resistor (R3). It is commonly used in the formation of various electrical circuits.The MPM1003AT1 system relies on the principles of Ohm\'s law, which states that the current flowing through a conductor is directly proportional to the voltage applied across its ends. In this case, the voltage is applied between the two terminals across the two resistors, R1 and R2. The current flowing through each resistor can then be determined by using the ohmic laws.The resistor R3 is formed by connecting two linear resistors in series. When one of the horizontal resistors is left unconnected, the MPM1003AT1 forms a three-loop network. Because the resistors R3 form a network, the voltage applied across them can be used to measure the resistance of R3. The resistance of R3 can then be adjusted by changing the resistance of the other two resistors in the circuit.The basic application field of MPM1003AT1 is resistors networks that allows more complex circuits to be formed. Multiple resistor networks can be connected together to form larger systems, allowing for complex systems that would not be possible with a single resistor. Additionally, the MPM1003AT1 can be used to construct resistors arrays, which are formed by connecting multiple resistors in parallel. This configuration allows for the use of multiple resistors in a single circuit, allowing for more complex and intricate circuit designs.One of the common applications of the MPM1003AT1 is in the control of filters. The resistors can be designed in such a way that when a signal is applied to one output, it can be used to modify the response of the filter. This is done by changing the resistance of the resistors in the circuit, which will change the frequency response of the filter. This type of filter design is often used in signal processing applications.The MPM1003AT1 is also used for precision measurements, such as measuring small differences in voltage across a large number of resistors. In this instance, the resistors within the network can be adjusted in such a way that the voltage across them is accurately measured. This type of application is often used in measuring circuit designs.Finally, the MPM1003AT1 can be used to form analog sensor networks. An analog sensor network consists of multiple resistors connected in such a way that the resistance of each resistor can be measured in order to detect changes in temperature, pressure, strain, etc. This type of network can be used to measure various physical phenomena, such as temperature changes over a certain area or the stress on a load bearing structure.The MPM1003AT1 is a versatile three-loop electronic resistor with a range of applications ranging from resistors networks to precision measurements and analog sensor networks. Its use in these types of applications is what makes it so useful and popular in the design of various electrical circuits.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description