Allicdata Part #: | MR5FB40L0-ND |
Manufacturer Part#: |
MR5FB40L0 |
Price: | $ 0.54 |
Product Category: | Resistors |
Manufacturer: | Stackpole Electronics Inc. |
Short Description: | RES 0.04 OHM 5W 1% AXIAL |
More Detail: | 40 mOhms ±1% 5W Through Hole Resistor Axial Curren... |
DataSheet: | MR5FB40L0 Datasheet/PDF |
Quantity: | 1000 |
50 +: | $ 0.49140 |
Series: | MR |
Packaging: | Bulk |
Part Status: | Active |
Resistance: | 40 mOhms |
Tolerance: | ±1% |
Power (Watts): | 5W |
Composition: | Metal Foil |
Features: | Current Sense, Moisture Resistant, Non-Inductive, Non-Magnetic |
Temperature Coefficient: | -- |
Operating Temperature: | -55°C ~ 275°C |
Package / Case: | Axial |
Supplier Device Package: | Axial |
Size / Dimension: | 0.330" Dia x 0.925" L (8.38mm x 23.50mm) |
Height - Seated (Max): | -- |
Number of Terminations: | 2 |
Failure Rate: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Through Hole Resistors play an important role in modern electronics. MR5FB40L0 is a special type of through hole resistor, designed to provide a reliable and accurate impedance to electrical systems.The MR5FB40L0 is a resistor type in which two separate ceramic surfaces are stacked on top of each other. Each resistor element is separated by a dielectric layer that isolates the resistors from each other. The ceramic material used for this type of resistor is highly resistant to temperature fluctuations and is able to maintain an accurate impedance over a wide temperature range.The MR5FB40L0 is ideally suited for use in applications which require a high voltage supply or a high current load. The combination of a wide operating voltage range and high current load capability makes the MR5FB40L0 an ideal choice for various industrial, military, and aerospace applications.The most common application for the MR5FB40L0 is as an electrical component in analog audio amplifiers, as it can provide a high current load with a low voltage supply. The combination of two isolated resistors provides a greater current capacity than a single, standard resistor with the same power rating. In addition to its use in high current loads, the MR5FB40L0 has also been used in power converters, signal-processing circuits, and frequency synthesizers. In these applications, the MR5FB40L0 is used to create a precise impedance load, enabling the circuit to operate at a specific frequency range.The working principle of the MR5FB40L0 is based on its construction. The two resistors are stacked together and separated by a dielectric layer, which prevents electrical current from flowing between them. The total resistance of the two resistors is determined by their individual resistances, combined with the dielectric layer. When a voltage is applied to the two resistors, the current flow is determined by the total resistance of the resistors. In order to ensure an accurate and reliable impedance, the dielectric layer of the MR5FB40L0 must remain intact in order to effectively isolate the two resistors from each other. If the dielectric layer is damaged or worn out, the two resistors will no longer be isolated from each other and the accuracy of the impedance load will be compromised. The MR5FB40L0 is a highly reliable and accurate resistor type which is suitable for various applications requiring a high voltage supply and a high current load. Its unique construction and dielectric layer provide excellent insulation, ensuring reliable and consistent performance. Due to its reliable and accurate performance, the MR5FB40L0 is well suited for a variety of applications, including those with a high current load, high voltage supply requirements, and frequency synthesis.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
MR5FT5L00 | Stackpole El... | 0.34 $ | 1000 | RES 0.005 OHM 5W 1% AXIAL... |
MR5FT6L00 | Stackpole El... | 0.34 $ | 1000 | RES 0.006 OHM 5W 1% AXIAL... |
MR5FTR300 | Stackpole El... | 0.34 $ | 1000 | RES 0.3 OHM 5W 1% AXIAL30... |
MR5FT7L50 | Stackpole El... | 0.34 $ | 1000 | RES 0.0075 OHM 5W 1% AXIA... |
MR5FTR170 | Stackpole El... | 0.34 $ | 1000 | RES 0.17 OHM 5W 1% AXIAL1... |
MR5FTR200 | Stackpole El... | 0.34 $ | 1000 | RES 0.2 OHM 5W 1% AXIAL20... |
MR5FB10L0 | Stackpole El... | 0.54 $ | 1000 | RES 0.01 OHM 5W 1% AXIAL1... |
MR5FB20L0 | Stackpole El... | 0.54 $ | 1000 | RES 0.02 OHM 5W 1% AXIAL2... |
MR5FB25L0 | Stackpole El... | 0.54 $ | 1000 | RES 0.025 OHM 5W 1% AXIAL... |
MR5FB30L0 | Stackpole El... | 0.54 $ | 1000 | RES 0.03 OHM 5W 1% AXIAL3... |
MR5FB50L0 | Stackpole El... | 0.54 $ | 1000 | RES 0.05 OHM 5W 1% AXIAL5... |
MR5FB75L0 | Stackpole El... | 0.54 $ | 1000 | RES 0.075 OHM 5W 1% AXIAL... |
MR5FB40L0 | Stackpole El... | 0.54 $ | 1000 | RES 0.04 OHM 5W 1% AXIAL4... |
MR5FBR150 | Stackpole El... | 0.54 $ | 1000 | RES 0.15 OHM 5W 1% AXIAL1... |
MR5FBR100 | Stackpole El... | 0.54 $ | 1000 | RES 0.1 OHM 5W 1% AXIAL10... |
MR5FB5L00 | Stackpole El... | 0.48 $ | 1000 | RES 0.005 OHM 5W 1% AXIAL... |
MR5FTR100 | Stackpole El... | 0.34 $ | 6000 | RES 0.1 OHM 5W 1% AXIAL10... |
MR5FT20L0 | Stackpole El... | 0.34 $ | 1000 | RES 0.02 OHM 5W 1% AXIAL2... |
MR5FT25L0 | Stackpole El... | 0.34 $ | 1500 | RES 0.025 OHM 5W 1% AXIAL... |
MR5FT30L0 | Stackpole El... | 0.34 $ | 1000 | RES 0.03 OHM 5W 1% AXIAL3... |
MR5FT75L0 | Stackpole El... | 0.34 $ | 500 | RES 0.075 OHM 5W 1% AXIAL... |
MR5FT50L0 | Stackpole El... | 0.34 $ | 2000 | RES 0.05 OHM 5W 1% AXIAL5... |
MR5FT10L0 | Stackpole El... | 0.34 $ | 1000 | RES 0.01 OHM 5W 1% AXIAL1... |
RES WW 7W 5% TH68 kOhms 5% 7W Through Ho...
RES WW 7W 5% TH1.3 Ohms 5% 7W Through Ho...
RES 24.9 OHM 1/4W 1% AXIAL24.9 Ohms 1% 0...
RES 2.8 OHM 3W 0.5% WW AXIAL2.8 Ohms 0.5...
RES 750K OHM 1/4W 1% AXIAL750 kOhms 1% 0...
RES 340 OHM 1W 1% WW AXIAL340 Ohms 1% 1W...