MR5FTR300

Series:	MR
Packaging:	Tape & Reel (TR)
Part Status:	Active
Resistance:	300 mOhms
Tolerance:	±1%
Power (Watts):	5W
Composition:	Metal Foil
Features:	Current Sense, Moisture Resistant
Temperature Coefficient:	--
Operating Temperature:	-55°C ~ 275°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.330" Dia x 0.925" L (8.38mm x 23.50mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Through hole resistors, like the MR5FTR300, are components used to control the desired flow of electrical current. They can be used for various applications including filtering, voltage, and power supply regulation. This article will cover the applications of MR5FTR300 through hole resistors and their working principles.

MR5FTR300 Application Fields

MR5FTR300 through hole resistors are used in a variety of electrical engineering applications. They are commonly used in power supplies, such as those used to regulate power voltage in computer systems and other electronic circuits. They are also used in signal conditioning applications, like filters and attenuators, to control the amplitude, phase and frequency of the signal. In some cases, they can be used to create a divider network to provide more complex voltage regulating and signal conditioning functions.MR5FTR300 resistors are also used in automotive systems, where they are used to control the flow of current in ignition circuits and other automotive electronics. In audio applications, they help to keep high frequencies out of the circuit, and in data acquisition systems, they are used to provide a constant current in the circuit for accurate readings. Additionally, they are commonly used in oscillator circuits and logic gates.

MR5FTR300 Working Principles

MR5FTR300 through hole resistors work by providing resistance to the flow of electrical current. Resistance is defined as the opposition to a current flowing through the resistor. The MR5FTR300 resistor is constructed from a material that has a fixed resistance. This resistance impedes the current flowing through it, which results in a voltage drop across the component. The amount of voltage drop is dependent on the resistance of the resistor, as well as the amount of current flowing through it. The resistance of MR5FTR300 through hole resistors can be adjusted by changing the length of the resistor, or by adding additional resistors in parallel to increase the overall resistance. The resistance of the MR5FTR300 resistor is typically given in ohms, with values ranging from 0.1 ohm to 2 megohm. The lower the resistance, the more current is allowed to flow through the resistor. The higher the resistance, the more it impedes the current flow.

Conclusion

MR5FTR300 through hole resistors are components used to control the flow of electrical current in a variety of applications. They work by providing resistance to the current, which is dependent on the given resistance value and the amount of current flowing through. By adjusting the resistance value, either through changing the length of the resistor or by using additional resistors in parallel, the voltage drop across the component can be adjusted.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description